Static Analysis of Crane Hook with I- Section and T- Section using Ansys
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2015 by IJETT Journal|
|Year of Publication : 2015|
|Authors : M.Amareswari Reddy ,M.N.V Krishnaveni, B.Nagaraju, M RajaRoy
|DOI : 10.14445/22315381/IJETT-V26P213|
M.Amareswari Reddy, M.N.V Krishnaveni, B.Nagaraju, M RajaRoy"Static Analysis of Crane Hook with I- Section and T- Section using Ansys", International Journal of Engineering Trends and Technology (IJETT), V26(2),72-77 August 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Crane hooks are highly liable components that are typically used for industrial purposes. Failure of a crane hook mainly depends on three major factors i.e. dimension, material. In this paper load carrying capacity is studied by varying the cross sections. The selected sections are I-section and T-section. The area remains constant while changing the dimensions for the two different sections. The crane hook is modelled using SOLIDWORKS software. The stress analysis is done using ANSYS 14.0 workbench Educational version. It is found that T cross section yields minimum stresses at the given load of 6 ton for constant cross section area among two cross sections. The stress distribution pattern is verified for its correctness on model of crane hook using Winkler-Bach theory for curved beams.
 AjeetBergaley and AnshumanPurohitdescribed their work on “Structural Analysis of Crane Hook Using Finite Element” International Journal of Science and Modern Engineering (IJISME) ISSN: 2319-6386, Volume-1, Issue-10, September 2013
 A.Gopichand carried an optimization of design parameters for “Crane Hook Using Taguchi Method” International Journal of Science and Modern Engineering (IJISME) ISSN: 2319-8753 An ISO 3297: 2007 Certified Organization Vol. 2, Issue 12, December 2013
 RashmiUddanwadikerin discussed on “Stress Analysis of Crane Hook and Validation by Photo-Elasticity” International Journal of Engineering Research & Technology ISSN: 2278-0181 Vol.3 - Issue 1 (January - 2014)
Chetan N. Benkar explained the “Finite Element Stress Analysis of Crane Hook with Different Cross Sections” International Journal for Technological Research in Engineering ISSN (Online): 2347 – 4718 Volume 1, Issue 9, May-2014
 Ismail Gerdemeli, G. U. Rajurkar, Dr. D. V. Bhope, Prof. S. D. Khamankar explained the “Finite Element Analysis of the Tower Damage which Occurs Due to Heavy Loads” International Journal of Engineering Research & Technology ISSN: 2278-0181 Vol.2 - Issue 8 (August -2013)
 ShyamLal Sharma, Tasmeem Ahmad Khan, Md. Parvez and KamleshKumariexperimented on “Design of Hoisting Arrangement of E.O.T. Crane (2008) International Journal of Engineering & Robotics Research ISSN 2278 – 0149 Vol. 2, No. 3, July 2013
 Santosh Shaun, RiteshDewangan, ManasPatnaik and NarendraYadav describes the “Study of Crane Hook Having Trapezoidal Section by Finite Element Method & Design of Experiments” International Journal of Modern Engineering Research (IJMER)ISSN: 2249-6645 Vol.2, Issue.4, July-Aug 2012 PP-2779-2781
 Takuma Nishimura, Takao Muromakiet, Kazuyuki Hanahara, Yukio Tada, Shigeyuki Kuroda and Tadahisa Fukui “Damage Factor Estimation of Crane-Hook (A Database Approach with Image, Knowledge and Simulation)”, 4th International Workshop on Reliable Engineering Computing (REC 2010).
 E. Narvydas, N. Puodziuniene, “Circumferential stress concentration factors at the asymmetric shallow notches of the lifting hooks of trapezoidal cross-section”, ISSN 1392 - 1207. Mechanika. 2012 Volume 18(2): 152-157.
Crane hook, Static analysis, Winkler- Bach theory, ANSYS 14.0.