Partial Replacement of Fine Aggregate & Cement in Concrete with Ceramic Rejects
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2015 by IJETT Journal|
|Year of Publication : 2015|
|Authors : Sadic Azeez, Remya Raju, Dr. P.R Sreemahadevan Pillai
|DOI : 10.14445/22315381/IJETT-V28P247|
Sadic Azeez, Remya Raju, Dr. P.R Sreemahadevan Pillai"Partial Replacement of Fine Aggregate & Cement in Concrete with Ceramic Rejects", International Journal of Engineering Trends and Technology (IJETT), V28(5),243-247 October 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Research is being carried out on the utilization of waste products in concrete as a replacement of natural sand and cement. Such waste products included in this paper are the rejects from ceramic industries, mainly quartz powder and grog. Each of these waste products has significant effects on the properties of concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing waste disposal problems. In this paper it is planning to replace both fine aggregate and cementitious material with the rejects from ceramic industries. After the physical and chemical analysis of quartz powder and grog, it will be able to identify its chemical and mineralogical composition. During the physical analysis like grain size analysis it is able to determine the utility size i.e. whether it can be replaced for sand or cement. In this paper both fine aggregate and cement is replaced with quartz and grog simultaneously and also fine aggregate alone is replaced with different proportions of quartz and grog . After the experimental analysis and testing an optimum replacement of 5% fine aggregate and 5% cement is possible. It is also found that compressive strength and splitting tensile strength of replaced specimens increases up to 25% replacement of fine aggregate without replacing cement .
 Gunalaan Vasudevan,Seri Ganis Kanapathy pillay “
Performance ofUsing Waste Glass Powder In Concrete As
Replacement Of Cement”American journal of engineering research.
 Mr.Anjan kumar M U, Dr. Asha Udaya Rao, Dr. Narayana Sabhahit” Reactive Powder Concrete Properties With Cement Replacement Using Waste Material” International Journal of Scientific & Engineering Research.
 S.P. Gautam, Vikas Srivastava and V.C. Agarwal “Use of glass wastes as fine aggregate in Concrete” J. Acad. Indus. Res. Vol. 1(6) November 2012.
 IS 12269-1987 “Indian Standard specification for 53 grade ordinary Portland cement“ Bureau of Indian Standards ,New Delhi,1997.
 IS 383-1970 “specifications for course aggregate and fine aggregates from natural sources for concrete” Bureau of Indian Standards ,New Delhi,1997.
 IS 10262-2009 “Indian Standard recommended guidelines for concrete mix design” Bureau of Indian Standards ,New Delhi,1997.
[7-] Is 516 -1959 “Indian standard methods of test in concrete” Bureau of Indian Standards ,New Delhi,1997.
 BIS:5816-1999 “Indian standard splitting tensile strengthof concrete test method” Bureau of Indian Standards ,New Delhi,1999.
 Works Bureau of Hong Kong, (2002) “Specifications facilitating the use of recycled aggregates.” WBTC No. 12.
 Moriconi G, Corinaldesi V, Antonucci R (2003) “Environmentally- friendly mortars: a way to improve bond between mortar and brick”, Material and Structure, 36(10), pp-702– 708
 Angelim RR, Angelim SCM, Carasek H (2003) “Influence of the addition of limestone, siliceous and clay fines in the properties of mortars and renderings”, Paper presented at the V Brazilian Symposium on Mortars Technology (SBTA), Paulo, Brazil, 11–13 June 2003.
Grog, quartz, ceramic rejects.