Modelling and Thermal-Static Coupled Field Analysis of Ventilated Disc Brake

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2015 by IJETT Journal
Volume-30 Number-4
Year of Publication : 2015
Authors : B.Nagaraju, B.Praveen, N Sudheer Kumar Varma, B.B.Ashok Kumar
DOI :  10.14445/22315381/IJETT-V30P238

Citation 

B.Nagaraju, B.Praveen, N Sudheer Kumar Varma,B.B.Ashok Kumar"Modelling and Thermal-Static Coupled Field Analysis of Ventilated Disc Brake", International Journal of Engineering Trends and Technology (IJETT), V30(4),197-203 December 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
A brake is a device by means of which artificial frictional resistance is applied to moving machine member, in order to stop the motion of machine. The disc brake is a device for slowing or stopping the rotation of a wheel. Number of times using the brake for vehicle leads to heat generation during braking event, such that disc brake undergoes breakage due to high Temperature. The aim of the paper is to design, ventilated model of a disc brake. Disc brake model is done by CATIA and analysis is done by using ANSYS workbench. The main purpose of this project is to study the thermal and structural analysis of the Materials for the Stainless Steel, Aluminum and Grey Cast Iron. A Comparison is made between three different materials used for ventilated disc brakes and the best material for making disc brake and type of disc brake have been suggested based on the magnitude of von-Mises stresses, temperature distribution and deformation.

 References

[1] Lee, K and Barber, J.R. Frictionally- Excited Thermo elastic Instability in Automotive Disk Brakes, ASME J. Tribology, vol. 115, page 607-614, (1993).
[2] Floquet, A. and Dubourg, M.C. Non axis symmetric effects for three dimensional Analyses of a Brake, ASME J. Tribology, vol. 116, page 401-407, (1994).
[3] Ali.Belhocine and Mostefa.Bouchetara, Thermo mechanical Behavior Of Dry Contacts In Disc Brake Rotor With a grey cast Iron Composition, laboratory of mechanics applied, faculty of mechanical engineering, university of sciences and the technology of oran, l.p 1505 el-mnaouer, us to 31000 Oran (Algeria).
[4] Keng Leng Khong, Simulation of Temperature Distribution in Brake Discs, Submitted, Department of Mechanical Engineering.
[5] Kennedy, F.E., Colin, F.Floquet, A. and Glovsky, R. Improved Techniques for Finite Element Analysis of Sliding Surface Temperatures. Westbury House page 138-150, (1984).
[6] Lin, J.Y. and Chen, H.T. Radial Axis symmetric Transient Heat Conduction in Composite Hollow Cylinders with Variable Thermal Conductivity, vol. 10, page 2-33, (1992).
[7] Brilla, J. Laplace Transform and New Mathematical Theory of Visco elasticity ,vol. 32, page 187- 195, (1997).
[8] Tsinopoulos, S. V, Agnantiaris, J. P. and Polyzos, D. An Advanced Boundary Element/Fast Fourier Transform Axis symmetric Formulation for Acoustic Radiation and Wave Scattering Problems, J.ACOUST. SOC. AMER., vol 105, page1517-1526, (1999).
[9] Blot, B., „Computation of a thermally stressed brake disc?, SAE Technical Paper Series: 890089, 1989
[10] Sheridan, D.C., „Approaches to the thermal modeling of Disc Brakes?, SAE Technical Paper Series: 880256, 1988

Keywords
ANSYS, CATIA, Ventilated Disc, Couple Field, Analysis.