Design and Analysis of V-Tail Unmanned Air Vehicle (UAV) for Surveillance Application
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2016 by IJETT Journal|
|Year of Publication : 2016|
|Authors : P.Hussain Babu, Rodriguez Arthurs S.A, S.Mahaboob Basha, Sadiq. P
|DOI : 10.14445/22315381/IJETT-V32P221|
P.Hussain Babu, Rodriguez Arthurs S.A, S.Mahaboob Basha, Sadiq. P"Design and Analysis of V-Tail Unmanned Air Vehicle (UAV) for Surveillance Application", International Journal of Engineering Trends and Technology (IJETT), V32(3),119-123 February 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Unmanned Aerial Vehicles (UAVs) are gaining popularity in military operations as surveillance and weapons platforms. The size of military UAVs varies from very large to hand-held and they are so popular that more UAVs are now being produced than conventional aircraft. These military platforms are expensive to buy and to support. This cost factor has so far limited their use in commercial and industrial applications, such as, security, inspection, ensuring obedience to the laws or search and rescue. The conclusion is made that the design what is made is air worthy and easy to handle and CATIA V5 software is used for designing the V tail and analysed by Ansys and XFLR5 softwares.
 Barnard, R.H.; Philpott, D.R. (2010). "10. Aircraft control". Aircraft Flight (4th ed.). Harlow, England: Prentice Hall. p. 275. ISBN 978-0-273-73098-9.
 "Blohm & Voss BV P.213 Luft `46 entry". Luft46.com. Retrieved 2013-06-01.
 Hunt, Adam & Ruth Merkis-Hunt: Skeletal Remains, pages 64-70. Kitplanes Magazine, September 2000.
 Raymer, Daniel P. (1999). Aircraft Design: A Conceptual Approach (3rd ed.). Reston, Virginia: American Institute of Aeronautics and Astronautics. p. 78. ISBN 1-56347- 281-3.
 "Cirrus SJ50 Design Notes". www.the-jet.com. Cirrus Design Corporation. 2008. Retrieved 2008-08-
 Hague R, Mansour S, and Saleh N, 2004, “Material and design considerations for rapid manufacturing”, International Journal of Production Research, 42(22), 4691- 4708.
 Angel R. Torrado, Corey M. Shemelya, Joel D. English, Yirong Lin, Ryan B. Wicker, David A. Roberson, Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing Additive Manufacturing, Volume 6, April 2015, Pages 16-29.
UAV, CATIA, VTAIL, ANSYS, XFLR5.