Investigation of Corrossion Effects of Jatropha Biodiesel on the Injector of an Engine Fuel System
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2014 by IJETT Journal|
|Year of Publication : 2014|
|Authors : I. Nuhu , F.M. Sani , I. A. Rufai
I. Nuhu , F.M. Sani , I. A. Rufai ,"Investigation of Corrossion Effects of Jatropha Biodiesel on the Injector of an Engine Fuel System", International Journal of Engineering Trends and Technology(IJETT), 8(1),9-13 February 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
This paper presents an investigation into the corrosive behaviour of biodiesel on the injector of the fuel system of a diesel engine. The experimental study was based on the methods of weight loss and scanning electron microscopy. Test specimens prepared from the injector of a diesel engine were exposed to different blends of Jatropha biodiesel for a period of 28 days under ambient conditions. Corrosion rates were determined in accordance with Callister (1997). Jatropha biodiesel blends B100, B50 and B5 exhibited corrosion rates of 0.017 mmpy, 0.013 mmpy and 0 mmpy respectively. Scanning Electron Microscopy (SEM) micrographs revealed some stains on the surfaces of the specimens corresponding to corrosive effects of the media and weight loss within the immersion period. The study has shown that Jatropha biodiesel blends with up to 5% biodiesel content can be used as motor fuel without any modification to the engine fuel system. The findings of the current research can serve as a guide in identifying the blends of Jatropha biodiesel that could suitably be used on a long term basis on a diesel engine without modification. This will surely promote the use of biodiesel as engine fuel and consequently help in protecting our environment.
 K. A. Sorate and P. V. Bhale, Impact of Biodiesel on Fuel System Materials Durability, Journal of Scientific and Industrial Research, Vol. 72, pp. 48-57, Jan. 2013.
 I.M. Bugaje and I.A. Mohammed, Biofuels as Petroleum Extender: Prospects and Challenges in Nigeria, Petroleum Training Journal, vol. 4, pp. 11-21, 2007.
 I. M. Bugaje and I. A. Mohammed, Biofuel Production Technology, Science and Technology Forum, Zaria, Nigeria, 2008.
 H.J. Kim, B.S. Kang, and M.J. Kim, “Transesterification of vegetable oil to biodiesel using heterogeneous base catalyst”, Catal Today, 93-95, pp.315–320, 2004.
 N. Jone and J.H. Miller, Jatropha curcas: Multipurpose Specie, A problematic sites the World Bank Washington D.C., U.S.A, 1992.
 M.H. Jayed , H.H. Masjuki, M.A. Kalam, T.M.I. Mahlia, M. Husnawan, and A.M. Liaquat, “Prospects of Dedicated Biodiesel Engines Vehicles in Malaysia and Indonesia’’ Renewable and Sustainable Energy Reviews 15 (2011) 220–235. Available: http:// www.elsevier.com/locate/rser
 G.Vellguth, Performance of vegetable oil and their monoesters as fuels for diesel engines, SAE, DOI: 10.4271/831358, 1983.
 M. Senthilkumar, A. Remesh, and B. Nagalingam, “Complete vegetable oil fueled dual fuel compression ignition engine”, SAE, 2001-28-0067, 2001.
 H. Raheman and A.G. Phadatare, Diesel Engine Emission and Performance from Blends of Karanja Methyl Ester and Diesel, Biomass Bioenergy, vol. 27, pp. 393–397, 2004.
 B. Kegl, Effects of biodiesel on emissions of a bus diesel engine, Bioresour Technol, vol. 99, pp. 863–873, 2008.
 O. A. Lapuerta and J. Rodríguez-Fernández, Effect of Biodiesel Fuels on Diesel Engine Emission”, Progress in Energy and Combustion Science, vol. 34, pp. 198-223, 2008.
 Ford Fleet – Showroom, Environmental Vehicles - Biodiesel Technology, 2005. : Available: https://www.fleet.ford.com/showroom/environmental vehicles/BiodieselTechnology.asp.
 V.A. Hillier, Fundamentals of Motor Vehicle Technology, 4th Edition, 1970.
 S.K. Jain, S. Kumar, and A. Chaube, “Technical Sustainability of Biodiesel and Its Blends with Diesel in C.I. Engines: A Review”, International Journal of Chemical Engineering and Applications, Vol. 2, No. 2, pp. 101-109, 2011.
 H. Jung, D.B. Kittelson, and M.R. Zachariah, “Characteristics of SME Biodiesel Fuelled Diesel Particle Emissions and the Kinetics of Oxidation”, Environ. Sci. Technol., vol. 40, pp. 4949-4955, 2006.
 Y.C. Sharma, B. Singh, and S.N. Upadhyay, “Advancements in Development and Characterization of Biodiesel: A Review”, Fuel, vol. 87, pp. 2355–2373, 2008.
 H. Yuan, B.L. Yang, and G.L. Zhu, “Synthesis of Biodiesel Using Microwave Absorption Catalysts”, Energy Fuels, vol. 23, pp. 548–552, 2009.
 G. Busca, Bases and Basic Materials in Chemical and Environmental Processes: Liquid versus Solid Basicity. Chem. Rev., vol. 110, pp. 2217–2249, 2010.
 J.K. Satyarthi, D. Srinivas, and P. Ratnasamy, “Influence of Surface Hydrophobicity on the Esterification of Fatty Acids over Solid Catalysts”, Energy Fuels, vol. 24, pp. 2154–2161, 2010.
 Y.C. Sharma, B. Singh, and J. Korstad, “Advancements in Solid Acid Catalysts for Ecofriendly and Economically Viable Synthesis of Biodiesel”, Biofuels Bioproducts & Biorefining, vol. 5, pp. 69-92, 2011.
 M. Nagy, M. Foston, and A.J. Ragauskas, “Rapid Quantitative Analytical Tool for Characterizing the Preparation of Biodiesel”, J. Phys. Chem. A, vol. 114, pp. 3883–3887, 2010.
 B. Singh, J. Korstad, and Y.C. Sharma, “A Critical Review on Corrosion of Compression Ignition (CI) Engine Parts by Biodiesel and Biodiesel Blends and Its Inhibition”, Renewable and Sustainable Energy Reviews, vol. 16, pp. 3401– 3408, 2012.
 M.H. Jayed , H.H. Masjuki, R. Saidur, M.A. Kalam, and M.I. Jahirul, “Environmental Aspects and Challenges of Oilseed Produced Biodiesel in Southeast Asia” Renewable and Sustainable Energy Reviews, vol. 13, pp. 2452–2462, 2009.
 W.D. Callister, Materials Science & Engineering: An Introduction, 4th Edition, John Wiley and Sons Inc., New York, 1997.
Biodiesel, Corrosion rate, Weight loss, SEM micrograph, Fuel system