Effect of Process Parameters on Surface Roughness of Cylindrical Grinding Process on Ohns (Aisi 0-1) Steel Rounds using ANOVA
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2016 by IJETT Journal|
|Year of Publication : 2016|
|Authors : M.Melwin Jagadeesh Sridhar, P.Sathish Kumar
|DOI : 10.14445/22315381/IJETT-V33P285|
M.Melwin Jagadeesh Sridhar, P.Sathish Kumar"Effect of Process Parameters on Surface Roughness of Cylindrical Grinding Process on Ohns (Aisi 0-1) Steel Rounds using ANOVA", International Journal of Engineering Trends and Technology (IJETT), V33(9),429-434 March 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Surface finish is the most important output responses in the production with respect to quantity and quality respectively cylindrical grinding is the important metal cutting process used widely in the finishing operations. OHNS steel is the most preferable material for manufacturing of fasteners, automotive components, die blocks and cutting tools. Surface quality is the important performance factor which to be considered in grinding process. The experimental work and statistical analysis in Research activities help in improving quality standards of manufactured components. In this work, the Surface quality of OHNS steel after cylindrical grinding process is proposed to be studied using L9 orthogonal array having three levels and three input parameters. Work speed, depth of cut and number of pass are considered as the input parameters for this study and the response parameters are minimum surface roughness and minimum tool wear. Lower surface roughness is the main objectives of every machining process. After conducting experiment, S / N ratio is used for optimization and ANOVA is used for analysis. It is predicted that work speed is a dominating parameter for lower surface roughness of cylindrical grinding.
 V. Pallavi, Anoop kumar and T. Mohandas (2012). Optimization of turning parameters for surface roughness using taguchi method. International Journal of Mechanical Engineering. Vol. 5 : Issue 2.
 Surinder kumar, Meenu and P.S. Satsangi (2012). A genetic algorithmic approach for optimization of surface roughness prediction model in turning using UD-GFRP composite. Indian Journal of Engineering and Materials Sciences. Vol. 19, 386-396.
 Qiyong Zeng, Kai Wu, Xiaofeng Zheng and Ming Zhu (2012). Influencing factor analysis of workpiece surface roughness and measuring system design for the main factors in high speed machining. Journal of Modern Manufacturing Technology. Vol. 4(1), 69-78.
 M. Janardhan and A. Gopala Krishna (2012). Multiobjective optimization of cutting parameters for surface roughness and metal removal rate in surface grinding using response surface methodology. International Journal of Advances in Engineering and Technology. Vol. 3, Issue 1, 270-283.
 A. Bhattacharya, A. Batish, N. Kumar, Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process,
 Ali Zahedi, Taghi T., Javed Akbari “ Energy aspects and work piece surface characteristics in ultrasonic assisted cylindrical grinding of alumina-zirconia ceramics” International journal of Machine Tools & Manufacture90(2015) 16-28
 Naresh kumar, Himanshu Tripathi,” Optimization of cylindrical grinding process parameters on C40E steel using Taguchi Technique” International journal of engg. Research & applications ISSN:2248-9622, Volume-5, Issue-I(part 3) January 2015
 Hardeep Singh, Rajesh Khanna, M.P. Garg (2011) Effect of Cutting Parameters on MRR and Surface Roughness in Turning EN-8, International Journal of Current
 Balla Srinivasa Prasad & M. M. M. Sarcar & B. Satish Ben, Development of a system for monitoring tool condition using acousto-optic emission signal in face turning-an experimental approach, Int J Adv Manuf Technol (2010) 51:57 – 67.
 H. Öktem, An integrated study of surface roughness for modeling and optimization of cuttin g parameters during end millin g operation, Int J Adv Manuf Technol (2009) 43:852 – 861.
 Ghani, J.A.; Chodhury, I.A.; and Hassan, H.H. (2004). Application of Taguchi method in the optimization of end milling parameters. Journal of Material Processing Technology, 145(1), 84-92.
 Bouchaïr, A.; Averseng, J.; and Abidelah, A. (2008). Analysis of the behaviour of stainless steel bolted connections. Journal of Constructional Steel Research, 64(11), 1264-1274.
 Adeel H. Suhail, N. Ismail, S. V. Wong and N.A. Abdul Jalil.“Optimization of cutting Parameter Based on Surface Roughness andAssistance of Work piece Surface Temperature in Turning Process”.,America J. of Engineering and Applied Science 105, 2010
 D.A.Doman. A.Warkentin, R.Bauer, “Finite element modelingapproaches in grinding”
 E. Brinksmeier, C. Heinzel, M. Wittmann, “Friction, Cooling andLubrication in Grinding”, Annals of the ClRP Vol. 48/2/1999.
Cylindrical Grinding, OHNS, Surface Roughness, S/N ratio, optimization, ANOVA.