CFD Analysis of Erosion dueto impact of 50 ?m Sand Particlesona3-D180DegreeU-Bend Using DPM Erosion Model

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2016 by IJETT Journal
Volume-36 Number-6
Year of Publication : 2016
Authors : Darshan Bhavesh Mehta
DOI :  10.14445/22315381/IJETT-V36P255


Darshan Bhavesh Mehta"CFD Analysis of Erosion dueto impact of 50 ?m Sand Particlesona3-D180DegreeU-Bend Using DPM Erosion Model", International Journal of Engineering Trends and Technology (IJETT), V36(6),302-305 June 2016. ISSN:2231-5381. published by seventh sense research group

Air along with sand particles of density 1500kg/m3 and 50 micron in diameter are used in this analysis with mass flow rate is 1kg/in. A180 degree bend is numerically simulated using FLUENT 6.2. The meshing software used is GAMBIT2.2. The Discrete Phase Model is used for analyzing the erosion due to particle impacton a three dimensional 180 degree U-Bend with pipe diameter of 0.50inches. Erosion in U-Bend is acommon phenomenon in pneumatic conveyor and other fluid handling equipment’s. The turbulent flow structures are investigated. And them agnitude and location of erosion in a U- Bend determined.


[1] ArlindodeMatosandFernandoA.Franca,?Bubblyflowsegregati on insideaU-bendpipe: Experimentationandnumerical simulation ChemicalEngineeringResearchandDesign, 2009, 87, 655-668.
[2] Benedetto Bozzini, Marco E. Ricotti, Marco Boniardi and Claudio Mele,?Evaluationoferosioncorrosioninmultiphaseflow viaCFDand experimentalanalysis,Wear, 2003, 255, 237- 245.
[3] K.Ekambara, R.S.Sanders,K.Nandakumar andJ.H. Masliyah,?CFD simulationofbubbly two-phaseflow inhorizontal pipes Chemical EngineeringJournal,2008, 144, 277-288.
[4] K.Hoang,M.R.Davis,?Flow structureandpressurelossfor two phase flowinreturnbends,Trans.ASME, 1984, 106, 30–37.
[5] M.Al-Yaari,A.Soleimani,B.Abu-Sharkh,U.Al- MubaiyedhandA.Al-Srakhi,?Effect ofdragreducingpolymersonoil-waterflowina horizontalpipe.InternationalJournalofMultiphaseFlows,200 9,35, 516- 524.
[6] Pitor A. Domanski and Christian J. L. Hermes, ?An improved correlationfortwo-phasepressuredropofR-22andR- 410A in180o returnbends,AppliedThermalEngineering, 2008, 28, 793-800.
[7] Samy M. El-Behery, Mofreh H. Hamed, M. A. El-Kadi and K. A.Ibrahim, ?CFD prediction of air-solid flow in 180o curved duct,Powder Technology, 2009, 191, 130-142.

E r o s i o n , 180o bend flow, Discrete Phase Model, CFDsimulation,pneumaticconveyor.