Comparison of Linear Static Analysis and Construction Sequence Analysis on Multistorey Building with RC Floating Column Resting on RC and Composite Transfer Girders
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2016 by IJETT Journal|
|Year of Publication : 2016|
|Authors : Meghana. B.S, T.H. Sadashiva Murthy
|DOI : 10.14445/22315381/IJETT-V36P264|
Meghana. B.S, T.H. Sadashiva Murthy"Comparison of Linear Static Analysis and Construction Sequence Analysis on Multistorey Building with RC Floating Column Resting on RC and Composite Transfer Girders", International Journal of Engineering Trends and Technology (IJETT), V36(7),343-346 June 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
In recent times, many buildings are planned and constructed with architectural complexities. The complexities include various types of irregularities like floating columns at various level and locations. These floating columns are highly disadvantageous in building built in seismically active areas. The earthquake forces that are developed at different floor levels in building need to be carried down along the height to ground by shortest path, but due to floating column there is discontinuity in the load transfer path which results in poor performance of building. Building structures are analyzed in a single step using linear static analysis (LSA) on the assumption that the structures are subjected to full load at once the whole structure is constructed completely. In reality the dead load due to the each structural components and finishing items are imposed in separate stages as the structures are constructed storey by storey for nonlinear behavior of material hence construction sequence analysis (CSA) is carried out.The analysis of the model is carried out with the help of ETABS software. It involves two types of analysis such as LSA and CSA, which is carried out on RC building structure of G+ 5 storeys with floating column in exterior position where the RC transfer girder is replaced by composite transfer girder and the parameter such as beam moments and deflection are compared.
 IshaRohilla ,Gupta S.M. et.al, “Seismic response of multi- storey irregular building with floating column”, International journal of engineering research and technology, Vol4, issue 3, pp506-518, Mar-2015.
 Kavya.N, Manjunatha.K et.al, “Seismic evaluation of multistory RC building with and without floating column”, International journal of engineering research and technology, Vol.2, issue 6, pp361-365, Sep-2015.
 Nikhil Bandwal, AnantPande et.al, “To study seismic behaviour of RC building with floating columns”, International journal of scientific engineering and technology research, vol.03, issue.08, pp1593-1596, May-2014.
 Sri Harsha.B and Vikranth.J, “Study and comparison of construction sequence analysis with regular analysis by using ETABS”, International journal of research sciences and advanced engineering, vol.2, issue8, pp218-277, Oct-Dec2014.
 Swapnil.B.Cholekarand Basavlingappa.S.M, “Comparative analysis of multistoried RCC and composite building due to mass irregularity”, International research journal of engineering and technology, vol.2, issue.4, pp603-608, July-2015.
Floating column, composite structure, linear static analysis, construction sequence analysis, ETABS.