Well Test Analysis of Deforming Reservoirs by use of MDH Type Curves

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2016 by IJETT Journal
Volume-38 Number-5
Year of Publication : 2016
Authors : Tom A. Jelmert, Tommy Toverud
DOI :  10.14445/22315381/IJETT-V38P250


Tom A. Jelmert, Tommy Toverud"Well Test Analysis of Deforming Reservoirs by use of MDH Type Curves", International Journal of Engineering Trends and Technology (IJETT), V38(5),276-281 August 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

The objective of this study is to predict changes in formation thickness, permeability, and porosity, as a function of fluid pressure. The methodology depends on well test interpretation by type curve matching. Changes in formation permeability may lead to poor well performance. Compaction may lead to reduced well integrity, notably for vertical and deviated wells. Then, there may be additional relative movement between the well and the formation in comparison with conventional reservoirs. Use of well-known transformations leads to diffusivity equations of linear appearance. Many solutions are available. Corresponding pressure solutions may be obtained by an inverse transformation.We find that, for a deforming reservoir, analysis based on the method of permeability modulus gives the composite (sum) elastic modulus.By interpretation of MDH type curves for build-up tests, we quantify the values of the elasticity moduli for both the thickness and permeability.


[1] C. S. Matthews, and D. G. RussellPressure Buildup and Flow Tests in wells. , Henry L. Doherty Series, Monograph 1, Dallas, TX: Society of petroleum engineers of AIME1977vol. 1
[2] R. Raghavan, et al. “An Investigation by Numerical Methods of the Effect of Pressure-Dependent Rock and Fluid Properties on Well Tests,” SPEJournal, June vol. 253, pp.267-571, June. 1972
[3] O. A. Pedrosa, “Pressure Transient Response in Stress- Sensitive Formations,” in Proc. California Regional Meeting , 1986, paper SPE 15115, p.203
[4] J. Kikani, and O. A. Pedrosa, “Perturbation Analysis of Stress-Sensitive Reservoirs,” In SPE Formation Evaluation, vol. 6,pp. 379-386, Sept. 1991.
[5] M. Y. Zhang and A. K. Ambastha, “New Insights in Pressure-Transient Analysis for Stress-Sensitive Reservoirs”, in Proc. SPE ATCE, paper SPE 28420. p. 617
[6] E. Ozkan and R. Raghavan, “New Solutions for Well-Test- Analyses Problem: Part1- Analytical Considerations. SPE Formation Evaluation, pp. 359-368, 1991
[7] T. A. Jelmert, and H. Selseng, H. “Pressure transientbehavior of stress-sensitive reservoirs.” Proc.SPE Latin American and Caribbean Petroleum Engineering Conference. Paper SPE 38970, 1997.
[8] T. A. Jelmert and H. Selseng. “Horner plot aids analysis in stress-sensitive reservoirs”. Oil and Gas Journal, vol. 96, p 67-68 and 77, June 29, 1998
[9] T. A. Jelmert. “Composite elastic modulus aids well performance and permeability predictions”. IJETT International Journal of Engineering Trends and Technology, vol. 29 Part 1, pp. 7-12, Nov. 2015
[10] C. C. Chen and R. Raghavan, “An approach to handle discontinuities by the Stehfest algorithm”. InSPEJournal, pp. 363-368, 1991

Deformable Reservoir Stress-sensitivity, Well Testing, Type Curves.