Implementation of Frequency Down Converter using Multiplier free filter on FPGA

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2012 by IJETT Journal
Volume-3 Issue-4                          
Year of Publication : 2012
Authors :  K.S.Sushmitha , G.Vimala Kumari

Citation 

K.S.Sushmitha , G.Vimala Kumari. "Implementation of Frequency Down Converter using Multiplier free filter on FPGA". International Journal of Engineering Trends and Technology (IJETT). V3(4):495-501 Jul-Aug 2012. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

In a Communication system, especially in some applications where confidential data is to be communicated , wideband of signals are used. Also the bandwidth of the signal is frequently varied so that it is undetectable by the third person. In such cases to detect the signal a Wideband DDC with variable filter specification s is required. In this paper, an efficient way of designing and implementing a Wideband Digital down Converter has been discussed. Though the received signal is RF signal with high data rates an IF stage is used to frequency shift the signal to fixed IF which is the input to ADC. This is sa mpled and given as input to DDC. Signal extraction using DDC is presented in detail. It is shown that f il ter bandwidth varies by varies with decimation factor. Decimation range in this paper is 2 to 16384. Filtering is implemented in stages to obtain efficient response. Also, the reasons for choosing FPGA over ASSP’s to implement DD C are provided. Xilinx ISE 10.1 version software is used for simulating each block of DDC at system level testing and Chip Scope Pro Analyzer tool is used for board level testing. Vitex - 5 FPGA with speed - 2 is the hardware used for implementing the design .

References

[1] GC4016 Multistandard Quad DDC Chip Data Sheet, Rev. 1.0. August 2001, Texas Instruments. (Formerly Graychip Inc.). Document: slws133a.pdf.
[2] Tjerk Bij lsma, Pascal T. Wolkotte, Gerard J.M. Smit “ An Optimal Architecture for a DDC” 2006 IEEE.
[3] Stephen Creaney and Igor Kostarnov “ Designing Efficient Digital Up and Down Converters for Wide band Systems”. XAPP1113 (v1.0) November 21, 2008.
[4] T.Hollis / R.Weir, “Theory of Digital Down Conversion” , Hunt Engineering, 2003.Rev 1.2.
[5] Xilinx “DDS Compiler v2.1”, Pr oduct specification DS5558 March 21,2008.
[6] E. B. Hogenauer. An economical class of digital filters for decimation and interpolation. IEEE Transactions on Acoustics, Speech and Signal Processing, ASSP - 29(2):155{162, 1981.
[7] Alan Y. Kwentus, Zhongnong Jiang, and Alan N. Willson. Application of Filter Sharp ening to Cascaded Integrator - Comb Decimation Filters . IEEE Transactions on Signal Processing , Vol. 45, No. 2, February 1997 457.
[8] Altera’s application note 455 April 2007, “Understanding CIC compensation filter” ver. 1.0.
[9] Alan V. Oppenheim and Ronald W. Sc hafer. Discrete - Time Signal Processing. Prentice - Hall Signal Processing Series. Prentice - Hall, Englewood Cliffs, 1989.
[10] IEEE Transactions on Acoustics, Speech and Signal Processing, Vol. ASSP - 23, no. 5 , October 1975 Optimum FIR Digital Filter Implementations for Decimation, Interpolation, and Narrow - Band Filtering.
[11] R. R. Shively, “On multistage FIR filters with decimation,” IEEE Trans. Acoust., Speech, Signal Processing, vol. ASSP - 23, pp. 353 - 357, Aug. 1975.
[12] J. Bhaskar, VHDL Primer,b3 rd edition , BSP, 2003.
[13] Field programmable gate array, S. Brown, R.J.Francis, J.Rose ,Z.G.Vranesic, 2007, BSP..

Keywords

Wideband Digital down converter, ADC, Base band signal , Decimation, ASSP, FPGA, System level testing, Board level testing.