Investigation of design parameter of two wheeler frame through comparative analysis
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2017 by IJETT Journal|
|Year of Publication : 2017|
|Authors : Manmohan Singh Thakur, Dr. Suman Sharma
|DOI : 10.14445/22315381/IJETT-V46P234|
Manmohan Singh Thakur, Dr. Suman Sharma "Investigation of design parameter of two wheeler frame through comparative analysis", International Journal of Engineering Trends and Technology (IJETT), V46(4),195-198 April 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Now a day there are mainly two types of frames developing one is square frame and other is tubular frame. In this work we will going to be compared what are the mechanical differences between a tubular and square (no tubular) frame and trying to take some conclusions. In this research we took two materials which are used mainly in two wheeler frame. That is aluminium and steel. We used Creo for modelling and ANSYS for analysis.
 Derek Covilla*, Steven Begga, Eddy Eltona, Mark Milnea,
Richard Morrisa, Tim Katza “Parametric finite element analysis
of bicycle frame geometries” The 2014 conference of the
International Sports Engineering Association.
 Jorge E. Rodrigueztx,And& L. Medaglia` ,Juan P. Casas`, “Approximation to the optimum design of a motorcycle frame using finite element analysis and evolutionary algorithm”.
 Mohd. Khairudin Bin Yaha “Simulatednstress and finite element analysis based of Suzuki FXR 150cc Motorcycle chassis”.
 Dario Croccolo* ? Massimiliano De Agostinis ? NicolòVincenzi “Structural Analysis of an Articulated Urban Bus Chassis via FEM: a Methodology Applied to a Case Study” Strojniškivestnik - Journal of Mechanical Engineering 57(2011)11, 799-809
 Prof. M.Sc. Boži? S.1, Prof.Gomba? E.2, Prof.Harmel A.3 “Redesign of motorcycle rear suspension with CAD technology”
 Maulik Lohia, Prof. Mohsin Bukhari, Prof. Mit Patel “Review Paper on Bike Chassis for Stability of Rider by Ergonomic”Research article IJESC (Volume 6 Issue No. 12)
. D.Kondayya, “3-Dimensional FE Analysis and Optimization of Bike Structure’’, International Journal of Engineering Research, Volume No.5 Issue: Special 2, pp: 308- 311.
. Aparna Deshpande, Amol B. Gaikwad, “Design and Optimization of Bicycle Frame for the Cyclist`s Comfort’’, International Journal on Recent and Innovation Trends in Computing and Communication, Volume: 4 Issue: 5,220 - 224.
. Gaurav Vasantrao Bhunte and Dr. Tushar R. Deshmukh, “A Review on Design and Analysis of Two Wheeler Chassis’’, International Journal For Research In Emerging Science And Technology, Volume-2, Issue-1, January-2015.
. Bhagyashri Adake, Dr. A. D. Desai, H. S. Bawiskar, “Cost and Structural Optimisation of Modular Bicycle Frame”, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 4, Issue 10, October 2015.
. Lakshmi Srinivas.G, BSV Ramarao, M. Aditya Seshu, V. Gurushanker, “Design And Manufacture Of Composite Bicycle Frame And Evaluation Of Compressive Properties Of ±450 EGlass/ Epoxy Composite With Different Introduced Defects’’, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 4, Issue 8, August-2015.
. Mohammad A Bukhari Marzuki, Mohammad Hadi Abd Halim and Abdul Razak Naina Mohamed, “Determination of Natural Frequencies through Modal and Harmonic Analysis of Space Frame Race Car Chassis Based on ANSYS’’, American Journal of Engineering and Applied Sciences.
. V. Terzic, S. A. Mahin and M. C. Comerio, “Comparative Life-Cycle Cost And Performance Analysis Of Structural Systems For Buildings’’, Proceedings of the 10th National Conference in Earthquake Engineering, Earthquake Engineering Research Institute, Anchorage, AK, 2014.
. Sagar Pardeshi, Pankaj Desle, “Design and Development of Effective Low Weight Racing Bicycle Frame’’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 12, December 2014.
. Derek Covilla, Steven Begga, Eddy Eltona, Mark Milnea, Richard Morrisa, Tim Katza, “Parametric finite element analysis of bicycle frame geometries’’, Procedia Engineering 72 ( 2014 ) 441 – 446.
We used Creo for modelling and ANSYS for analysis.