Studies on Effect of Ball Burnishing Parameters on Ferrous and Non-Ferrous Materials with and without Presence of Abrasive Particles
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2017 by IJETT Journal|
|Year of Publication : 2017|
|Authors : Deekshith Shetty, Manoj Kumar K, Prasad, Bharath Kumar
|DOI : 10.14445/22315381/IJETT-V48P266|
Deekshith Shetty, Manoj Kumar K, Prasad, Bharath Kumar "Studies on Effect of Ball Burnishing Parameters on Ferrous and Non-Ferrous Materials with and without Presence of Abrasive Particles", International Journal of Engineering Trends and Technology (IJETT), V48(7),378-386 June 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
In the quality assurance of machine components, the so-called finishing and superfinishing processes have important roles. During recent years, the post-machining cold forming methods such as burnishing, shot peening and others have occupied a very important place in industry. Burnishing, which is one of the effective methods used to improve the surface layer properties, is essentially a cold forming process in which the raised micro-irregularities on the surface layer are plastically moved and pressed into the microcavities. The process is carried out with a highly polished ball or roller type tool which is traversed under force over a rotating work piece. Machines normally used for burnishing operation can be drill presses, lathes, boring machines, and automatic bar or chucking machines. The process of burnishing can be done on parts which are turned, bored, reamed or ground. Any ductile or malleable material with hardness less than 40 HRC can be successfully burnished. Although diamond burnishing machines are available for finishing material harder than 40 HR. the burnishing process is used to improve the shape of components besides producing a good surface finish. Quite the opposite, the burnishing tool will not correct deviations from roundness or Straightness to any degree. In this work an attempt is made to compare the results of ball burnishing (in dry and abrasive paste conditions). The parameters taken in consideration are burnishing speed, burnishing feed, burnishing force, ball material and number of passes. Mathematical models have been developed in terms of surface roughness and surface hardness for ball burnishing process.
1. S.Rajesham and Jem Cheong tak, A study on the surface
characteristics of Burnished components, Journal of
Mechanical working Technology, 20 (1989) 129-138.
2. N.H.Loh,S.C.Tam and S.Miyazawa, A study of the effects of ball Burnishing parameters on surface roughness using factorial design, Journal of Mechanical working Technology, 18 (1989) 53-61.
3. N.H.Loh,S.C.Tam and S.Miyazawa, A study of the effects of ball Burnishing parameters on surface roughness using factorial design, Journal of Mechanical working Technology, 18 (1989) 53-61.
4. C.S.jawalkar and R.S.walia, Study of Roller Burnishing processes on EN-8 specimens using design of experiments, Journal of Mechanical Engineering Research Vol. 1 (1) pp. 038-045, November, 2009.
5. Dabeer,P.S and Purohit,G.K, Effects of ball Burnishing parameters on surface roughness using surface roughness methodology, APEM journal, 5(2010) 2,111-116.
6. M.fattouh, M.H.elaxir and S.M.serage, Investigating into the Burnishing of external cylindrical surfaces of 70/30 Cu-Zn alloy-, wear, 127 (1988) 123-137.
7. Tareq A. Abu shreehah, Developing and investigating of elastic ball Burnishing tool, Int. J Adv Manuf Techno (2008) 36:270-279.
8. A.M.Hassan, aiman sharef Al-Bsharat, Influence of Burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metals ,wear 199 (1996) 1-8.
9. Aysun Sagbas, Funda Kahraman, DETERMINATION OF OPTIMAL BALL BURNISHING PARAMETERS FOR SURFACE HARDNESS, Materials and technology 43 (2009) 5, 271–274.
10. S. Thamizhmanii , B. Saparudin, S. Hasan,A study of multiroller burnishing on non-ferrous metals, VOLUME 22 ISSUE 2 June 2007,AMME journal.
11. P R Babu,Dr T S Prasad, Dr A V S Raju, The Effect of External Roller-burnishing on the Surface Roughness and Surface Hardness of EN 31 Alloy Steel, IE(I) Journal–MM.
12. U M Shirsat and B B Ahuja,parametric analysis of combined turning and ball Burnishing process, Indian journal of engineering and Material sciences,Vol. 11 , October 2004,pp. 391-396.
Burnishing, Ball burnishing, Surface roughness, Surface hardness, F, N,S,f.