Effect of Stresses on the Walls of a Pressure Vessel

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2017 by IJETT Journal
Volume-48 Number-8
Year of Publication : 2017
Authors : D. C. Nnadi, C. C. Eze, J.C Aririguzo, C. S. Agu
DOI :  10.14445/22315381/IJETT-V48P274

Citation 

D. C. Nnadi, C. C. Eze, J.C Aririguzo, C. S. Agu "Effect of Stresses on the Walls of a Pressure Vessel", International Journal of Engineering Trends and Technology (IJETT), V48(8),426-433 June 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
The effect of stresses on the walls of a pressure vessel was investigated. The pressure vessels are used in power generation industry for fossil and nuclear power, the petrochemical for storing and processing crude oil as well as gasoline. The research sought to increase the safety standard of the manufacturing and use of pressure vessels. Results obtained showed that the best working pressurenofn the vessel was at 9.90N/m and thicknessof 90mm.

 References

[1] Affendi b. Hussin?2000, Design, Analysis and Fabrication of Pressure Vessel, Department ofManufacturing Engineering March 2008, University Technical Malaysia Melaka
[2] Bernsen S.A., F.A. Simonen and K.R. Balkey (2006). PRA and Risk-Informed Analysis, Chapter 45 Companion Guide to the ASME Boiler and Pressure Vessel Codes – Second Edition – Volume 3, ASME Press, New York, USA.
[3] Dickson T.L., P.T. Williams and S Yin. (2004). Fracture Analysis of Vessels – Oak Ridge,FAVOR, v04.1, Computer Code: User?s Guide, NUREG/CR-6855, ORNL/TM-2004/245, October 2004.
[4] Dillstrom P. (2003). A Short Description of ProSACC, NURBIM Report D4/Appendix G, DNV, Stockholm. [A probabilistic fracture mechanics code for pressure vessels and piping that was developed in Sweden for commercial power plant applications].
[5] Rajput,R.K. (2012), Strength of Materials (Mechanics of Solids), S. Chand and Company
[6] Khurmi, R.S. and Gupta, J.K (2010). A Textbook of Machine Design.S Chand Publishers, New Delhi.
[7] Megyesy, Eugene F. "Pressure Vessel Handbook, 14th Edition." PV Publishing, Inc. Oklahoma.City, OK
[8] G. C. Dioke,A. Offiong and D.C. Nnadi .Design of a single phase 3-level, 4-level, 5-level Inverter-Fed Asynchronous Motor-drive with Diode- clamped Topology,IJETT.Vol 12. 2014.

Keywords
Results obtained showed that the best working pressurenofn the vessel was at 9.90N/m and thicknessof 90mm.