A Review of Gear Parameters Optimization
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2017 by IJETT Journal|
|Year of Publication : 2017|
|Authors : Dr. P.Arulmozhi, Dr. M.Chandrasekaran, Ramesh R
|DOI : 10.14445/22315381/IJETT-V49P215|
Dr. P.Arulmozhi, Dr. M.Chandrasekaran, Ramesh R "A Review of Gear Parameters Optimization", International Journal of Engineering Trends and Technology (IJETT), V49(2),92-98 July 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Gearing is one of the most effective methods for transmitting power and rotary motion from the source to its application with or without change of speed or direction. Gears are mostly used to transmit torque and angular velocity from one shaft to another shaft. The less efficiency of gear box of a machine tool is a serious problem as it increases maintenance cost and also affects the reputation of a firm. Hence its life has to be increased and should be made more reliable. Optimization plays an important role in gear design as reducing the weight or volume of a gear set will increase its service life and improve the bearing capacity. The method of optimum design is effective in the field of gear research to determine the optimum gear parameters for satisfactory design. In gear design, number of parameters is involved. The gear design also requires an iterative approach to optimize the gear parameters. The alternative for the above problem is to design and optimization of a worm gear box which reduced maintenance and improved reliability, lack of lubrication requirements, precise peak torque transmission, inherent overload protection, physically isolated input and output shafts, misalignment tolerance, and low acoustic noise and vibration etc. And also it is multi-objective function with constraints is very difficult to optimize using conventional optimization techniques, used non-traditional optimization technique called Genetic algorithm. Genetic Algorithm is used for determining the best possible combination of gear parameters. A review of relevant literature in the areas of optimized design of gear indicates that compact design of gears involves a complicated algebraic analysis.
 Faisal.S. Hussain1, Syed Mohiuddin2, Sajid Siddiqui3, R.N. Dehankar., IOSR Journal of Mechanical and Civil Engineering ?A Study on Optimized Design of a Spur Gear Reduction Unit p-ISSN: 2320-334X PP 01-07.(2014).
 Jian Chen1,2a, Hongmo Shang2b, Liang Tian2c, Guicheng Wang1d*, ?The Design of Indexable Gear Insert and Cutting Parameter Optimization, (2014).
 R. Thirumurugan, G. Muthuveerappan, Mech. Based Des. Struct. Mach, Critical Loading Points for Maximum Fillet and Contact Stresses in Normal and High Contact Ratio Spur Gears Based on Load Sharing Ratio, 39(1)(2011) 118-141.
 R. P. Sekar, G. Muthuveerappan, Effect of backup ratio and cutter tip radius on uniform bending strength design of spur gears, Procedia Mater. Sci. 5(2014) 1640-1649.
 P. Marimuthu, G. Muthuveerappan, Effect of Addendum Height and Teeth Number on Asymmetric Normal Contact Ratio Spur Gear Based on Load Sharing, Universal Journal of Mechanical Engineering 2 (4)(2014) 132-136.
 G. Marunic Machine Design, ?Web deformation related to parameters of gear structure, 4(3)(2012) 161-166.
 Pair Carlos H. Wink and Nandkishor S. Mantri,? Gear Design Optimization for Low- Contact Temperature of a High-Speed, Non-Lubricated Spur ?,(May 2013).
 Yallamti Murali Mohan1, T.Seshaiah2, Spur Gear Optimization By Using Genetic Algorithm, (2012).
 Karlis Paulins, Arturs Irbe, Toms Torims*, Spiral Bevel Gears with Optimised Tooth-End Geometry, (2014).
 1 Jihui Liang, 2lili Xin, Dynamic Simulation Of Spiral Bevel Gear Based On Solidworks And Adams, Journal Of Theoretical And Applied Information Technology 20th January 2013. Vol. 47 No.2.
 Christian Brechera, Christoph Löpenhausa, Peter Knechta,* Procedia, Design of acoustical optimized bevel gears using manufacturing simulation, CIRP 41 ( 2016 ) 902 – 907.
 Xiang Tieming*,1,2, Zhou Shuiting1 and Yi Liao1, Free Modal Analysis for Spiral Bevel Gear Wheel Based on the Lanczos Method, The Open Mechanical Engineering Journal, 2015, 9, 637-645.
 Saman Khalilpourazary & Abdol rahman Dadvand & Taher Azdast & Mohammad Hossein Sadeg hi, Design and manufacturing of a straight bevel gear in hot precision forging process using finite volume method and CAD/CAE technology, Int J Adv Manuf Technol (2011) 56:87–95.
 Rushil H. Sevak, Saurin Sheth, Literature Review On Worm And Worm Gearbox Efficiency And Life. Study and Investigate Effect of Input Parameters on Temperature and Noise in Gearbox Using DOE?, © 2014 IJEDR | Volume 2, Issue 2 | ISSN: 2321-9939.
 Wen qingming, Xu hua, Tang weixiang, The Research and Analysis of the New Modification Theory of Toroidal Worm gearing, International Conference on System Science, Engineering Design and Manufacturing Informatization, (2010).
 Prakash D Patel, J.M.Patel, An Experimental Investigation of Power Losses in Gear box at different operating condition, National Conference on Thermal, Fluid and Manufacturing Science, Proceedings of TFMS 2012 January 20 – 21, 2012, Surat, Gujarat, India.
 Bernd-Robert Höhn, Klaus Michaelis and Michael Hinterstoißer, Influence Factor on Gearbox Power Loss, 978-1-4244- 7739-5/10/$26.00 ©2010 IEEE.
 Achtmann, J., and Bär, G., 2003, ?Optimized Bearing Ellipses of Hypoid Gears, ASME J. Mech. Des., 125, pp. 739–745.
 Simon, V., 2005, ?Optimal Tooth Modifications in Hypoid Gears, ASME J. Mech. Des., 127, pp. 646–655.
 G H Parameter Optimization of Harmonic Gear Drive Based on Hybrid Genetic Algorithm Bo Zeng, Ran Ding, Zefang Zhou, Zhonglai Wang, Huanwei XuV. (2012)IEEE.
 Dipesh Patel1 R. G. Jivani2 J. R. Koisha3 R. C. Sanghvi4, Design and Optimization of Helical Gear for Bending Strength?, IJSRD (2015).
 Wei Feng1 and Lin Hua2,*, Multi-objective optimization of process parameters for the helical gear precision forging by using Taguchi method, Journal of Mechanical Science and Technology 25 (6) (2011) 1519~1527.
 Ping WANGa, Zhou LANb , Xiaoyang SHENc , Weight Reduction Design of Gear Drive Based on Parameter and structural Optimization, 2010.
 Gregory Hyatta, Markus Piberb, Nitin Chaphalkara, Orrin Kleinhenza, Masahiko Moria, A Review of New Strategies for Gear Production, 6th CIRP International Conference on High Performance Cutting, HPC2014, Procedia CIRP 14 ( 2014 ) 72 – 76.
 Sathiskumar, M., R. Ramesh, and R. Balaji. "ANALYSIS OF BLADE DESIGN HORIZONTAL AXIS WIND TURBINE." INTERNATIONAL JOURNAL OF RESEARCH AND INNOVATION IN ENGINEERING TECHNOLOGY 2.12 (2016).
Gears, Spur Gear, Spiral Bevel Gears, Hypoid Gears, gear design.