Simulation of Three Phase Soft Starter using Multiple SCRS

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2017 by IJETT Journal
Volume-49 Number-7
Year of Publication : 2017
Authors : Arjun Sharma
DOI :  10.14445/22315381/IJETT-V49P270


Arjun Sharma "Simulation of Three Phase Soft Starter using Multiple SCRS", International Journal of Engineering Trends and Technology (IJETT), V49(7),451-456 July 2017. ISSN:2231-5381. published by seventh sense research group

Motor Soft starter is typically used to control high starting current flowing by the induction motor. The control division of motor soft starter is prepared with more than two set of SCR coupled back to back in similar. A motor soft starter is a machine used with AC electrical motors to provisionally decrease the load and torque in the power train and electric current surge of the motor during start-up. In this paper, represents a motor soft starter using only multiple SCRs. The thyristor is a soft starter, its decreases the dimension, density & reduce the amount of SCR. Simulation result of future topology is compared with the conventional topology.

[1] W. Shephered and J. Stanway, “The poly phase induction motor control by firing angle adjustment of silicon controlled rectifiers,” IEEE International Convention Record, pp, 135-154, 1964.
[2] W. Shephered, “ On the analysis of the three phase induction motor with voltage control by thyristor switching,” IEEE Transaction on Industry and general Application, Vol, IGA-4, pp, 304-311, May/Jun 1968.
[3] C. B. Jacobina, R. L. de A. Ribeiro, A. M. N. Lima, and E. R. C. da Silva, “Fault- tolerant reversible AC motor drive system,” IEEE Transactions on Industry Applications, Vol. 39, No. 4, pp. 1077-1084, Jul/Aug 2003.
[4] G. Zenginobuz, I. Cadirci, M. Ermis, and C. Barlak, “Soft starting of large induction motors at constant current with minimized starting torque pulsations,” IEEE Transactions on Industry Applications, Vol. 37, Issue 5, pp. 1334-1347, Sep/Oct 2001.
[5] A. M. S. Mendes and A. J. M. Cardoso, “Fault-tolerant operating strategies applied to three-phase induction-motor drives,” IEEE Transactions on Industrial Electronics, Vol. 53, No. 6, pp. 1807-1817, Dec. 2006.
[6] M. R Corrêa, C. B. Jacobina, E. R. C. da Silva, and A. M. N. Lima, “An Induction motor drive system with improved fault tolerance,” IEEE Transactions on Industry Applications, Vol. 37, No. 3, pp. 873-879, May/Jun 2001. [7] Huang, et al.., “ESD protection design for advanced CMOS,” in Proc. SPIE, 2001, pp. 123-131.
[8] S. P. Bingulac, “On the compatibility of adaptive controllers (Published Conference Proceedings style),” in Proc. 4th Annu. Allerton Conf. Circuits and Systems Theory, New York, 1994, pp. 8–16.
[9] M. -D. Ker; C. -Y. Wu, T. Cheng, M. J. -N. Wu, T. -L. Yu, and A.C. Wang, “WholechipESD protection for CMOS VLSI/ULSI with multiple power pins,” Proc. of theInt.Integrated Reliability Workshop, pp. 124–128, 1994.
[10] C. Russ, M. Mergens, J. Armer, p. jozwiak, G. Kolluri, L. Avery, and K. Verhaege, “GGSCRs: GGNMOS triggered silicon controlled rectifiers for ESD protection in deep submicron CMOS processes,” in Proc. EOS/ESD Symp., 2001, pp.22-31.
[11] M.-D. Ker and K.-C. Hsu, “overview of on-chip electrostatic discharge protection design with SCR-vased devices in CMOS intergrated circuits,” IEEE Tran. Device Mater. Reliab. Vol. 5, no. 2, Jun 2005, pp.235-249.
[12] P.-Y.Tan, M. Indrajit, p.-H. Li, and S.H.Voldman, “Rc-triggered PNP and NPN simultaneously switched silicon controlled rectifier ESD networks for sub-0.18um technology,” in Proc. Of IEEE Int. Symp. On Physical and Failure Analysis of Integrated Circuits, 2005, pp. 71-75.
[13] M. D. Ker and K. C. Hsu, “Latchup-free ESD protection design with complementary substrate-triggered SCR devices,” IEEE J. Solid State Cir., vol. 38, No. 8, pp. 1380-1392,2003.

Soft starter, induction motor, two phase control, torque pulsation.