Optimum Design of a High Performance Intermediary Heat Exchanging System
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2017 by IJETT Journal|
|Year of Publication : 2017|
|Authors : Harikrishnan R
|DOI : 10.14445/22315381/IJETT-V54P210|
Harikrishnan R "Optimum Design of a High Performance Intermediary Heat Exchanging System", International Journal of Engineering Trends and Technology (IJETT), V54(1),62-65 December 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
In the design of efficient thermal systems, the regulation of steam or hot air through the cylindrically designed tubes find out efficient only if the heat exchanging system is in par with other heat transfer systems. The primary aim of a thermal system is the formation of thermal energy and its transformation into work Energy. This process involves lots of passages over the entire heat transfer area. Simultaneously across the flow of motive steam over the tubes, there are obviously Energy and Power losses. This affects the overall effectiveness of the thermal system. Therefore if optimum size parameters are defined for the heat transfer system, it will be highly helpful. This will definitely improve the performances in the thermal system. In this paper, there is an attempt to design optimally a high efficient intermediary heat exchanging system.
1. Analytical Investigation of FAN Shroud on a Thermal Heat Exchanger for Automotive Applications:K NanthaGopal, B.Ashok, RishabhBahuguna, Tanmay Prasad; SAE INTERNATIONAL.
2. High-Precision Modeling of Heat exchanger Core on Vehicle Engine Room Airflow Analysis: Sinya Miura, Takashi Yasuda dated 2017-03-28;SAE International.
3. A Thermal Bus for Vehicle Cooling Applications-Design and Analysis: ShervinShoaiNaini, Junkui (Allen)Huang, Richard Miller, John R Wagner, Denise Rizzo, Scott Shurin, Katherine Sebeck dated 28-03-2017;SAE International.
4. Evaluation of Heat Pipe Heat Exchanger for Automotive Applications: Alaa El-Sharkawy, Ahmed Uddin, SAE International.
5. Scaling Model of Heat Exchangers in Automotive Air Conditioning Systems: KaushalkumarJha, Imran Shaik, SAE International.
6. Research on and Thermal performance of the Heat Exchanger in Automotive Exhaust- Based Thermoelectric Generator: Xinyu Wang, YadongDeng, SAE International.
7. A Heat Transfer Text Book by John. H.Lienhard.
8. Modeling and Approximation in Heat Transfer:LeonGlicksman and John Lienhard.
9. Statistical Thermodynamics: Chang-LinTien.
10. Principles of Heat Transfer: FrankKreith.
In this paper, there is an attempt to design optimally a high efficient intermediary heat exchanging system.