Analytical Study of Performance of a Centrifugal Pump for Different Operating Conditions
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2017 by IJETT Journal|
|Year of Publication : 2017|
|Authors : Dadapeer D, Veeresh G Gunjalli
|DOI : 10.14445/22315381/IJETT-V54P225|
Dadapeer D, Veeresh G Gunjalli "Analytical Study of Performance of a Centrifugal Pump for Different Operating Conditions", International Journal of Engineering Trends and Technology (IJETT), V54(3),175-179 December 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Centrifugal pumps are used extensively for hydraulic transportation of liquids over short to medium distance through pipelines where the requirements of head and discharge are moderate. From such literature, it was found that most previous research, especially research based on analytical and numerical approaches had focused on the design or near-design state of pumps. Few efforts were made to study the off-design performance of pumps. Therefore, Performance evaluation of turbo machine is essential in order to determine the safe operating zone.
 Abdulkadir Aman, Sileshi Kore and Edessa Dribssa* flow simulation and performance prediction of centrifugal pumps using cfd-tool.
 K M Guleren and A Pinarbasi* Numerical simulation of the stalled flow within a vaned centrifugal pump.
 R.RAGOTH SINGH1,2 & M.NATARAJ3 parametric study and optimization of centrifugal pump impeller by varying the design parameter using computational fluid dynamics: part i.
 E.C. Bacharoudis*,1, A.E. Filios2, M.D. Mentzos1 and D.P. Margaris1 Parametric Study of a Centrifugal Pump Impeller by Varying the Outlet Blade Angle.
 LIU Houlin*, WANG Yong, YUAN Shouqi, TAN Minggao, and WANG Kai Effects of Blade Number on Characteristics of Centrifugal Pumps.
 SHI Weidong, ZHOU Ling*, LU Weigang, PEI Bing, andLANG Tao Numerical Predictionand Performance Experiment in a Deepwell Centrifual Pump with Different ImpelOutlet Width.
 K.M. Pandey*, A.P. Singh1 and Sujoy Chakraborty2 Numerical studies on effects of blade number variations on performance of centrifugal pumps at 2500 rpm.
 Thord Wennberg1, Anders Sellgren2, Lee Whitlock3 Predicting the performance of centrifugal pumps when handling complex slurries.
 Khin Cho Thin, Mya Mya Khaing, and Khin Maung Aye Design and Performance Analysis of Centrifugal Pump.
hydraulic transportation, pipelines.