Performance Analysis of Direct Torque Controlled, Inverter-fed PMSM Drive for Wire Drawing Machines
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2018 by IJETT Journal|
|Year of Publication : 2018|
|Authors : Temitayo O. Olowu, Funso K. Ariyo, Moses O. Onibonoje
|DOI : 10.14445/22315381/IJETT-V55P203|
Temitayo O. Olowu, Funso K. Ariyo, Moses O. Onibonoje "Performance Analysis of Direct Torque Controlled, Inverter-fed PMSM Drive for Wire Drawing Machines", International Journal of Engineering Trends and Technology (IJETT), V55(1),8-15 January 2018. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Fast process times, high dynamic torque and speed control, quick accelerations to a speed-level and deceleration to zero speed again without losing tension are the major drive requirements of wire drawing machines. Permanent Magnet Synchronous Motors (PMSM) drives are fast becoming popular in various applications due to its high efficiency, power density, efficiency, high torque to inertia ratio and high reliability. The major disadvantage to its use is its cost of deployment. The paper analyses the performance of a Direct Torque Controlled (DTC) inverter-fed PMSM drive for wire drawing machines. The DTC PMSM drive offers a good dynamic performance for fast switching high torque requirement that characterizes wire-drawing machines. The simulation shows satisfactory values of torque ripples for various values of torque required.
 Abhro Mukherjee, Industrial control of dancer-less take up system for modern wire drawing machines with smart controllers" in journal of Automation and system engineering (JASE ) Volume 2 issue 4 (2008).
 B. K. Bose, “Power electronics and motion control-Technology status and recent trends,” IEEE Trans. Ind. Application., vol. 29, pp. 902–909, Sept. /Oct., 1993.
 W. Leonhard, “Adjustable speed ac drives,” Proceedings of IEEE, vol. 76, pp. 455-471, April, 1988.
 B. K. Bose, “Variable frequency drives-technology and applications,” in Proc. ISIE 93(Budapest), June, 1993, pp 1-18.
 P. Liu, H. P Liu “Permanent-magnet synchronous motor drive system for electric vehicles using bidirectional z-source inverter” IET Electrical Systems in Transportation, Volume 2 Issue.
 Kondo Minoru, Application of Permanent Magnet Synchronous Motor to Driving Railway Vehicles. Railway Technology Avalanche, No.1, January 1, 20.
 Gieras J.F., and Wing M. (2002). Permanent magnet motor technology: design and applications. 2nd ed., Marcel Dekker, New York.
 YASKAWA AC Drives Wire Drawing Applications Market Overview.
 D. Casadei; F. Profumo; G. Serra; A. Tani, FOC and DTC: Two Viable Schemes for Induction Motors Torque Control, IEEE Transactions on Power Electronics. Volume 17 Issue 5. Sep 2002.
 B. Chitti Babu, C. Poongothai . High Performance Direct Torque Controlled Induction Motor Drive for Adjustable Speed Drive Applications. 2008 First International Conference on Emerging Trends in Engineering and Technology.
 A. Kamalaselvan, S. Lenin Prakash. Modeling Simulation and Analysis of Closed Loop Speed Control of PMSM Drive System. 2014 International Conference on Circuit, Power and Computing Technologies [ICCPCT].
 Salih Baris Ozturk Direct torque control of permanent magnetSynchronous motors with non-sinusoidal back-emf, PhD dissertation, Texas A&M university. Mat 2008.
 Handbook of Workability and Process Design, edited by George E. Dieter, Howard A. Kuhn, S. Lee Semiatin.
PMSM, DTC, Wire drawing.