Vibration Analysis of Beams
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2018 by IJETT Journal|
|Year of Publication : 2018|
|Authors : Vaibhav Ghodge, A.P. Bhattu, S.B.Patil
|DOI : 10.14445/22315381/IJETT-V55P216|
Vaibhav Ghodge, A.P. Bhattu, S.B.Patil "Vibration Analysis of Beams", International Journal of Engineering Trends and Technology (IJETT), V55(2),81-86 January 2018. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
This paper presents the numerical results of Vibration analysis of a cantilever beam with load at the tip and simply supported beam with the center load. Modal analysis of a cantilever beam and simply supported beam were carried out in ANSYS for different materials. The results were compared and it was found that for the same cross-section and for both configurations (i.e. cantilever and simply supported) structural steel gives higher natural frequencies.
 Grover G.K., “Mechanical Vibrations”, Nem Chand & Bros, Eighth Edition, 2009.
 Rao S.S., “Mechanical Vibrations”, Wesley, Third Edition, 1995.
 ANSYS WORKBENCH, Reference guide, Chapter-1, Page-3, 2014.
 Ravi Prasad and D.R. Seshu, "A study on dynamic characteristics of structural materials using modal analysis",Asian Journal of Civil Engineering, Volume 9, Number 2, pp. 141-152, 2008.
 Free Vibrations of a Cantilever Beam (Continuous System) [Online]. Available:http://iitg.vlab.co.in/?sub=62&brch=175&sim=1080&cnt=1
 Mauro Caresta, “Beam Vibrations” , [Online]Available: https://www.colorado.edu/physics/phys1240/phys1240_fa15/homelabs/Beam_vibration_Mauro%20Caresta_UNSW.pdf
 Abdullah Ö., Mojtaba G., Akio S., Ashraf S. and Mohammed N.A.S., “Design and Experimental Implementation of a Beam-Type Twin Dynamic Vibration Absorber for a Cantilevered Flexible Structure Carrying an Unbalanced Rotor: Numerical and Experimental Observations”, Hindawi Publishing Corporation, Shock and Vibration, July 2015.
Vibration,Cantilever beam,Simply supported beam, FEM, Modal Analysis