Monitoring the Process of Gear Shaft Creating

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2018 by IJETT Journal
Volume-64 Number-3
Year of Publication : 2018
Authors : Vyacheslav Lyashenko, Svitlana Sotnik, M. Ayaz Ahmad
DOI :  10.14445/22315381/IJETT-V64P222


MLA Style: Vyacheslav Lyashenko, Svitlana Sotnik, M. Ayaz Ahmad "Monitoring the Process of Gear Shaft Creating" International Journal of Engineering Trends and Technology 64.3 (2018): 123-125.

APA Style:Vyacheslav Lyashenko, Svitlana Sotnik, M. Ayaz Ahmad (2018). Monitoring the Process of Gear Shaft Creating. International Journal of Engineering Trends and Technology, 64(3), 123-125.

The paper analyzes the features of the shaft-gear type details. A review of existing shaft types. As a result, a generalized algorithm for creating a shaft gear detail was proposed, on the basis of which the project will be created and implemented in the Scada software environment.

[1] R. A. Sklyarov, and et al., Tehnologicheskaya podgotovka proizvodstva vala-shesterni na stankah s ChPU, M., 2016.
[2] B. B. Isaev, “Tehnologiya naplavki zub?ev val-shesterni privoda prokatnogo stana”, Nauchnyiy zhurnal, vol. 9, pp. 31-33, 2017.
[3] V. Y. Blyumenshtein, and A. V. Ferranti, “Calculation and justification parameters of strengthening technology to produce drill rig shaft gear on the basis of mechanics of technological inheritance”. In Coal in the 21st Century: Mining, Processing and Safety (pp. 265-273), 2016.
[4] R. Matarneh, S. Sotnik, N. Belova, and V. Lyashenko, “Automated modeling of shaft leading elements in the rear axle gear”, International Journal of Engineering & Technology, vol. 7(3), pp. 1468-1473, 2018.
[5] X. Wang, and V. Makis, “Autoregressive model-based gear shaft fault diagnosis using the Kolmogorov–Smirnov test”, Journal of Sound and Vibration, vol. 327(3-5), pp. 413-423, 2009.
[6] S. Nallusamy, “Lean manufacturing implementation in a gear shaft manufacturing company using value stream mapping”, International Journal of Engineering Research in Africa, vol. 21, pp. 231-237, 2016.
[7] I. Gonzalez-Perez, V. Roda-Casanova, and A. Fuentes, “Modified geometry of spur gear drives for compensation of shaft deflections”, Meccanica, vol. 50(7), pp. 1855-1867, 2015.
[8] J. M?czak, “Local meshing plane analysis as a source of information about the gear quality”, Mechanical Systems and Signal Processing, vol. 38(1), pp. 154-164, 2013.
[9] V. Lyashenko, R. Matarneh, and S. Sotnik, “Modeling of Machine Design with Numerical Control in UG NX 7.5 System”, The International Journal of Engineering and Science (IJES), vol. 7(7), pp. 28-37, 2018.
[10] V. Lyashenko, S. Sotnik, T. Sinelnikova, and M. A. Ahmad, “Methodology Modeling of Parts with Replaceable Hard Alloy Plates Types in the SolidWorks System”, Saudi Journal of Engineering and Technology (SJEAT), vol. 3(3), pp. 119-126, 2018.
[11] S. Sotnik, R. Matarneh, and V. Lyashenko, System “Model Tooling For Injection Molding”, International Journal of Mechanical Engineering and Technology, vol. 8(9), pp. 378–390, 2017.
[12] M .A. Ahmad, V. Lyashenko, V. Lyubchenko, A. Khan, and O. Kobylin, “The Methodology of Image Processing in the Study of the Properties of Fiber as a Reinforcing Agent in Polymer Compositions”, International Journal of Advanced Research in Computer Science, vol. 7(1), pp. 15-18, 2016.
[13] R. Matarneh, S., Sotnik, Z. Deineko, and V. Lyashenko, “Highlights methodology of time characteristics optimization for plastic products production”, International Journal of Engineering & Technology, vol. 7(1), pp. 165-173, 2018.
[14] V. Lyashenko, M. A. Ahmad, S. Sotnik, Zh. Deineko, and A. Khan, “Defects of Communication Pipes from Plastic in Modern Civil Engineering”, International Journal of Mechanical and Production Engineering Research and Development, vol. 8(1), pp. 253-262, 2018.
[15] A. Khan, S. Joshi, M. A. Ahmad, and V. Lyashenko, “Some Effect of Chemical Treatment by Ferric Nitrate Salts on the Structure and Morphology of Coir Fibre Composites”, Advances in Materials Physics and Chemistry, vol. 5(01), pp. 39-45, 2015.

Gear shaft, process, creation, control, quality.