The Effect of Butt-weld Defects of Aluminum Joints on Fatigue Life Using Basquin Prediction Model
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2018 by IJETT Journal|
|Year of Publication : 2018|
|Authors : Mohammed Algarni, Mohammed Zwawi
|DOI : 10.14445/22315381/IJETT-V65P217|
MLA Style: Mohammed Algarni, Mohammed Zwawi "The Effect of Butt-weld Defects of Aluminum Joints on Fatigue Life Using Basquin Prediction Model" International Journal of Engineering Trends and Technology 65.2 (2018): 92-95.
APA Style:Mohammed Algarni, Mohammed Zwawi (2018). The Effect of Butt-weld Defects of Aluminum Joints on Fatigue Life Using Basquin Prediction Model. International Journal of Engineering Trends and Technology, 65(2), 92-95.
Discontinuities and voids in weldments affect the fatigue life of welded joints. An example of these discontinuities in a welded joint is undercut. The undercut causes high-stress concentrations on the joints that are calculated based on the root radius and depth of the undercut. Therefore, different undercuts cause varying stress concentration increases based on their geometry. Numerous undercut geometries can be found with different levels of effects on fatigue life. Industrial codes and operational standards set conservative tolerances for undercut geometries. Thus, the need for one model that is capable of predicting the fatigue limit for various undercuts is crucial. From this point of view, this paper investigates the capability of the phenomenological Basquin fatigue model for predicting the fatigue life of different undercut geometries. The research is based on a scripted code in VBA using the least square method for calibration and compares the code results to experimental fatigue data. The research results show the good agreement of the Basquin model prediction compared to experimental results.
 S. J. Maddox, "Assessing the significance of flaws in welds subject to fatigue," Welding journal, vol. 53, no. 9, 1974.
 S. J. Maddox, "The effect of mean stress on fatigue crack propagation a literature review," International Journal of Fracture, vol. 11, no. 3, pp. 389-408, 1975.
 S. J. Maddox, "An analysis of fatigue cracks in fillet welded joints," International Journal of Fracture, vol. 11, no. 2, pp. 221-243, 1975.
 S. J. Maddox, "Review of fatigue assessment procedures for welded aluminium structures," International Journal of Fatigue, vol. 25, no. 12, pp. 1359-1378, 2003.
 S. J. Maddox, Fatigue strength of welded structures. Woodhead publishing, 2014.
 J. L. Otegui, H. W. Kerr, D. J. Burns, and U. H. Mohaupt, "Fatigue crack initiation from defects at weld toes in steel," International journal of pressure vessels and piping, vol. 38, no. 5, pp. 385-417, 1989.
 J. L. Grover, "Initial flaw size estimating procedures for fatigue crack growth calculations," The Welding Institute, pp. 275-285, 1988.
 H. J. Grover, S. M. Bishop, and L. R. Jackson, Axial-Load Fatigue Tests on Notched Sheet Specimens of 24S-T3 and 75S-T6 Aluminum Alloys and of SAE 4130 Steel With Stress-Concentration Factors of 2.0 and 4.0. National Aeronautics and Space Administration, 1951.
 C. F. Boulton, "Acceptance levels of weld defects for fatigue service," Welding Journal, Welding Research Supplement, 1977.
 L. W. Sandor, "Weld Defect Tolerance Study," SUN SHIPBUILDING AND DRY DOCK CO CHESTER PA1980.
 J. E. M. Jubb, "Undercut or toe groove--the Cinderella defect," Metal Construction, vol. 13, pp. 94-101, 1981.
 E. Åstrand, T. Stenberg, B. Jonsson, and Z. Barsoum, "Welding procedures for fatigue life improvement of the weld toe," Welding in the World, vol. 60, no. 3, pp. 573-580, 2016.
 C. Steimbreger and M. Chapetti, "Undercut tolerances in industry from a fracture mechanic perspective," 2017, vol. 165, p. 21009: EDP Sciences.
 N. A. M. Khairussaleh, G. A. R. Parke, and B. Imam, "Factors Influencing the Design Life of Old Steel Bridges," 2018, vol. 419, p. 012027: IOP Publishing.
 V. F. R. d. Santos, "Aplicação da metodologia Seis Sigma para a redução de retrabalho em juntas soldadas em um processo de soldagem FCAW: estudo de caso," 2016.
 J. Johnstone and J. Curfew, "Twelve steps to engineering safe onshore oil and gas facilities," Oil and Gas Facilities, vol. 1, no. 04, pp. 38-46, 2012.
 T. Tovey, "An Engineer’s Guide to Nondestructive Weld Examination," in Pipelines 2015, 2015, pp. 250-256.
 O. H. Basquin, "The exponential law of endurance tests," 1910, vol. 10, pp. 625-630.
 R. E. Peterson, "Stress concentration factors," John Willey and Sons, p. 49, 1974.
 W. D. Pilkey and D. F. Pilkey, Peterson`s stress concentration factors. John Wiley & Sons, 2008.
 J. Marin, Mechanical behavior of engineering materials. Prentice-Hall, 1962.
 Y. Hamano, M. Koyama, S. Hamada, and H. Noguchi, "Notch sensitivity of the fatigue limit in high-strength steel," ISIJ International, vol. 56, no. 8, pp. 1480-1486, 2016.
 A. Roiko and J. Solin, "Measurement of small cracks initiating from inclusions, Focused Ion Beam notches and drilled holes," International Journal of Fatigue, vol. 62, pp. 154-158, 2014.
 T. Matsueda and H. Noguchi, "Fatigue Limit Evaluation of Blunt-Notched Specimen Using ?KthValue of Small Crack," Procedia Engineering, vol. 10, pp. 1023-1028, 2011.
 B. Atzori and P. Lazzarin, "Notch sensitivity and defect sensitivity under fatigue loading: two sides of the same medal," International Journal of Fracture, vol. 107, no. 1, pp. 1-8, 2001.
 H. J. Grover, W. S. Hyler, and L. R. Jackson, "Fatigue Strengths of Aircraft Materials: Axial-Load Fatigue Tests on Edge-Notched Sheet Specimens of 2024-T3 and 7075-T6 Aluminum Alloys and of SAE 4130 Steel with Notch Radii of 0.004 and 0.070 inch," 1959.
Fatigue life, Undercut, butt-weld, Basquin model, Notch