Analysis of Process Parameters on the Biomass Gasification Using Response Surface Methodology
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2018 by IJETT Journal|
|Year of Publication : 2018|
|Authors : M. Senthil Kumar
|DOI : 10.14445/22315381/IJETT-V65P228|
MLA Style: M. Senthil Kumar "Analysis of Process Parameters on the Biomass Gasification Using Response Surface Methodology" International Journal of Engineering Trends and Technology 65.3 (2018): 155-162.
APA Style:M. Senthil Kumar (2018). Analysis of Process Parameters on the Biomass Gasification Using Response Surface Methodology. International Journal of Engineering Trends and Technology, 65(3), 155-162.
This paper is to study the effect of design and operating parameters, mainly as bed temperature (T), pressure (P), equivalence ratio(R), feed rate (F) and particle size (S) on the performance of the gasification process of wood powder as biomass in a updraft reactor. In the present investigation, an empirical relationship was developed to predict the process of generating producer gas with better quality through gasification of biomass in a fluidized bed reactor using response surface methodology (RSM). The producer gas component such as O2, H2, CO, CO2, CH4, and N2 were analyzed in the laboratory along with the evaluation of tar yield and cold gas efficiency. It was observed that the concentrations of hydrogen, oxygen nitrogen and carbon monoxide were increased with rise in gasification temperature, pressure and equivalent ratio (0.2-0.35). Higher equivalence ratios (0.4-0.5) caused to decrease the concentrations of hydrogen, oxygen, nitrogen and carbon monoxide. Higher equivalence ratio also resulted in more gas yields and cold gas efficiency due to increase in the exothermic reactions. Furthermore, it was observed that the CH4 and CO2 decreased with the increase of temperature and pressure. The developed model was made a good prediction.
 A.V.Bridgwater, The technical and economic feasibility of biomass gasification for power generation. Fuel. 74(3)(1995) 631–53.
 C. Di Blasi, Kinetic and heat transfer control in the slow and flash pyrolysis of solids, Industrial and Engineering Chemistry Research 35 (1) (1996) 37–46.
 A.Ergudenler, Gasification of wheat straw in a dual distributor type fluidized bed reactor. Unpublished PhD. thesis, Technical University of Nova Scotia, Halifax, Nova Scotia, Canada;(1993).
 Mitchell D (2008) A note on rising food prices. Policy Research Working Paper 4682, The World Bank Development
 Farrell AE, Plevin RJ, Turner BT, Jones AD, O’Hare M, Kanman DM (2006) Ethanol can contribute to energy and environmental goals. Science 311:506–509.
 Rammamorth R, Kastury S, Smith WH (2000) Bioenergy: vision for the new millennium. Science Publishers, Enfield
 Huber GW, Iborra S, Corma A (2006) Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering. Chem Rev 106:4044–4098.
 Foust TD, Wallace R, Wooley R, Sheehan J, Ibsen K, Dayton D, Himmel M, Ashworth J, McCormick R, Hess JR, Wright C, Radtke C, Perlack R, Mielenz J, Wang M, Synder S, Werpy T (2007) A national laboratory market and technology assessment of the scenario. Technical Report, NREL/TP-510-4094.
 Czernik S, Bridgwater AV (2004) Overview of applications of biomass fast pyrolysis oil. Energy Fuels 18(2):590–598
 M.M.Bergqvist , K.S. Wardh, A.Das, E.O.Ahlgren, A techno-economic assessment of rice husk-based power generation in the Mekong River Delta of Vietnam. Int J Energy Res. 32(12) (2008)1136e50.
 C.R. Altafini, P.R. Wander, R.M.Barreto. Prediction of the working parameters of a wood waste gasifier through an equilibrium model. Energy Convers Manage. 44(2003)2763–77.
 M.Baratieri, P.Baggio, L.Fiori, M.Grigiante. Biomass as an energy source: thermodynamic constraints on the performance of the conversion process. Bioresour Technol. 99(2008)7063–73.
 Z.Zainal , R. Ali , C.Lean , K.Seetharamu,. Prediction of performance of a downdraft gasifier using equilibrium modeling for different biomass materials. Energy Convers Manage. 42(2008)1499–515.
 K.J.Ptasinski, M.J.Prins, A.Pierik, Exergetic evaluation of biomass gasification. Energy. 32( 2007)568–74.
 M.J.Prins, K.J.Ptasinski , F,Janssen. From coal to biomass gasification: comparison of thermodynamic efficiency. Energy.32 (2007)1248–59.
 M.R.Mahishi, D.Goswami, Thermodynamic optimization of biomass gasifier for hydrogen production. Int J Hydrogen Energy. 32(2007)3831–40.
 P.De Filippis, C.Borgianni ,M.Paolucci , F.Pochetti , Gasification process of Cuban bagasse in a two-stage reactor. Biomass Bioenergy.27(2004)247–52.
 Z.A. Bin ZainalAlauddin, L. Pooya, M. Mohammadi, A.R. Mohamed, Gasification of lignocellulosic biomass in fluidized beds for renewable energy development. ar eview, Renewable and Sustainable Energy Reviews. 14(2010) 2852–2862.
 K.G.Mansaray, A.E.Ghaly, A.M.Al-Taweel, F. Hamdullahpur, Ugursal, Air gasification of rice husk in a dual distributor type fluidised bed gasifier. Biomass Bioenergy. 17(1999)315–332. (Temperare)
 Simin Shabani, Mojtaba Aghajani Delavar, Mohammadreza Azmi. Investigation of biomass gasification hydrogen and electricity co-production with carbon dioxide capture and storage, international jornal of hydrogen energy 38, pp. 3630-3639, 2013 (Pressre)
 Koc R, Kazantzis NK, Hua Ma Y. A process dynamic modeling and control framework for performance assessment of Pd/ alloy-based membrane reactors used in hydrogenproduction. Int J Hydrogen Energy 36:4934e51.(2011)
 P.Mathieu, R.Dubuisson, Performance analysis of a biomass gasifier. Energy Convers. Manage..Eqivalent ratio & Feed rate. 43(2002)1291–1299
 C.L.Lin, M.L.Wey, S.D.You, The effect of particle size distribution onminimum fluidization velocity at high temperature. Powder Technol. 126 (2002) 297–301. (Particle Size & Feed rate)
 A.V.Drift, J.Doorn, J.W.Vermeulen, Ten residual biomass fuels forcirculating fluidized-bed gasification. Biomass Bioenergy. 20(2009) 45–56.
 S.Luoa, B.Xiao, Z. Hua, S. Liua,Y. Guana, L. Caia, Influence of particle size on pyrolysis and gasification performance of municipal solid waste in a fixedbed reactor. Bioresour Technol. 101(16)(2010) 6517–6520. (Particle Size)
 Susana Mart?´nez-Lera, Jose´ TorricoJavier Pallare´s Antonia GilDesign and first experimental results of a bubbling fluidized bedfor air gasification of plastic waste, J Mater Cycles Waste Manag.15 (2013)370–380.
 M. Risberg, O.G.W. Ohrman , B.R. Gebart , P.T. Nilsson, A. Gudmundsson , M. Sanati, Influence from fuel type on the performance of an air-blown cyclonegasifier, Fuel. 116 (2014) 751–759.
 K.G.Mansaray, A.E.Ghaly, Al-Taweel AM, Hamdullahpur F, Ugursal VI. Airgasification of rice husk in a dual distributor type fluidized bed gasifier.Biomass Bioenergy.17(1999)315–32.
 Kaupp Albrecht. Gasification of rice hulls: theory and practices. Deutsches Zentrum Fuer Entwicklungs Technologien (GATE): Eschborn; (1984).
 G.F. Schiefelbein , Biomass thermal gasification research, recent results – UnitedStates DOE’s research program. Biomass.19(1989)145–59.
 Z.A. Bin Zainal Alauddin, L. Pooya, M. Mohammadi, A.R. Mohamed, Gasification of lignocellulosic biomass in fluidized beds for renewable energy development: a review, Renewable and Sustainable Energy Reviews. 14 (2010) 2852–2862.
 J.Hanb, H.Kimb, H.Minamib, W. Shimizuc, T.G Wang, The effect of the particle size of alumina sand on the combustion and emission behavior of cedar pellets in a fluidized bed combustor. Bioresour. Technol. 99(9)(2008) 3782–3786.
 Y. Zhao, S. Sun, H. Zhou, R. Sun, H. Tian, J. Luan, J. Qian, Experimental study onsawdust air gasification in an entrained-flow reactor, Fuel Processing Technology.91 (2010) 910–914.
 P.K. Senapati, S. Behera, Experimental investigation on an entrained flow typebiomass gasification system using coconut coir dust as powdery biomass feedstock,Bioresource Technology. 117(2012) 99–106.
 L.Wang, C.L.Weller, D.D.Jones, M.A.Hanna. Contemporary issues inthermal gasification of biomass and its application to electricity and fuel production.Biomass Bioenergy. 32(2008)573–81.
 P.Mathieu, R.Dubuisson, . Performance analysis of a biomass gasifier. EnergyConvers. Manage. 43(2002) 1291–1299.
 A.K.Sharma. Equilibrium modeling of global reduction reactions for a downdraft (biomass) gasifier. Energy Convers Manage. 49(2008)832–42.
 M.Vaezi ,M.Passandideh-Fard, M.Moghiman, M.Charmchi. Gasification of heavy fuel oils: a thermochemical equilibrium approach. Fuel. 90(2011) 878–85.
 S.Rapagna, N.Jana, A.Kiennemann, P.U.Foscolo, Steam-gasification of biomass in a fluidized-bed of olivine particles. Biomass Bioenergy. 19(2000)187–197.
 C.Franco, F.Pinto, I.Gulyurtlu, I.Cabrita, . The study of reactions influencing the biomass steam gasification process. Fuel. 82(2003) 835–842.
 M.J.C.Van der Stelt, H.Gerhauser, J.H.A.Kiel, K.J.Ptasinski, Biomass upgrading by torrefaction for the production of biofuels: a review. Biomass Bioenergy. 35(2011)3748–3762.
 J.I.Hayashi, S.Hosokai, N.Sonoyama, Gasification of low-rank solid fuels with thermochemical energy recuperation for hydrogen production and power generation. Process Saf. Environ. 84(2006) 409–419.
 S. Hu, J. Xiang, L. Sun, M. Xu, J. Qiu, P. Fu, Characterization of char from rapid pyrolysis of rice husk. Fuel Process Technol. 89(2008)1096–1105.
 D. Lv, M. Xu, X. Liu, Z. Zhan, Z. Li, H. Yao, Effect of cellulose, lignin, alkali and alkaline earth metallic species on biomass pyrolysis and gasification, Fuel Processing Technology. 91 (2010) 903–909.
wood powder, Producer gas, Fluidized bed gasifier, Equivalent ratio and Response surface methodology.