Review of Research Data Published on 18 Ni-Co-Mo-Ti Maraging Steel, by Viswanathan et al 1993, Lee et al 2007 and Mathematical Modeling Attempt for Ageing time Prediction for 18 Ni-Co-Mo-Ti Maraging Steel and Unveil Parameters which Effect Mathematical Modeling of Heat Treatment

 International Journal of Engineering Trends and Technology (IJETT) © 2019 by IJETT Journal Volume-67 Issue-4 Year of Publication : 2019 Authors : Bineeth Benny DOI :  10.14445/22315381/IJETT-V67I4P207

Citation

MLA Style: Bineeth Benny "Review of Research Data Published on 18 Ni-Co-Mo-Ti Maraging Steel, by Viswanathan et al 1993, Lee et al 2007 and Mathematical Modeling Attempt for Ageing time Prediction for 18 Ni-Co-Mo-Ti Maraging Steel and Unveil Parameters which Effect Mathematical Modeling of Heat Treatment" International Journal of Engineering Trends and Technology 67.4 (2019): 27-32.

APA Style:Bineeth Benny (2019). Review of Research Data Published on 18 Ni-Co-Mo-Ti Maraging Steel, by Viswanathan et al 1993, Lee et al 2007 and Mathematical Modeling Attempt for Ageing time Prediction for 18 Ni-Co-Mo-Ti Maraging Steel and Unveil Parameters which Effect Mathematical Modeling of Heat Treatment. International Journal of Engineering Trends and Technology, 67(4), 27-32.

Abstract
A Mathematical approach towards the prediction of consecutive aging time in 18 Ni-Co-Mo-Ti maraging steels to get desired strength value, for meeting engineering requirement. Taking inspiration from JM Pardal et.al, 2005 and Nong Wang et.al 2005. Data values from U.K Viswanathan 1993 and Lee.2007 have been used for deriving equations. Devised an equation for finding ageing time ,found true for both maraging steel C250 and C350. Modeling is based on the basic understanding that strengthening due to ageing process is the product of ageing time and ageing temperature .

Reference
[1] Wan, N., Xiong, W. and Suo, J., 2005. Mathematical model for tempering time effect on quenched steel based on Hollomon parameter. Cailiao Kexue Yu Jishu(Journal of Materials Science & Technology), 21(6), pp.803-806. (WAN,2005).
[2] Rack, H. J., and David Kalish. "The strength and fracture toughness of 18 Ni (350) maraging steel." Metallurgical and Materials Transactions B 2, no. 11 (1971): 3011-3020( Rack,1971).
[3] Zackay, V. F., E. R. Parker, J. W. Morris, and G. Thomas. "The application of materials science to the design of engineering alloys. A Review." Materials Science and Engineering 16, no. 3 (1974): 201-221.(Zackay,1974).
[4] Pardal, J. M., S. S. M. Tavares, V. F. Terra, M. R. Da Silva, and D. R. Dos Santos. "Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steel." Journal of Alloys and Compounds 393, no. 1 (2005): 109-113. (Pardal ,2005).
[5] Development In18 per cent nickel maraging steels -Nickel Institute , stitute , Courtesy of Inco Limited (NiDi-Inco Ltd,1976 )
[6] Viswanathan, U. K., G. K. Dey, and M. K. Asundi. "Precipitation hardening in 350 grade maraging steel." Metallurgical Transactions A 24, no. 11 (1993): 2429-2442. (Viswanathan,1993).
[7] George, E. T. "Steel heat treatment: metallurgy and technologies." Steel treatment hand book, 352 (2006).(George,2006).
[8] Lee, Yen-Jung, Ming-Chueh Kung, I-Kang Lee, and Chang-Pin Chou. "Effect of lath microstructure on the mechanical properties of flow-formed C-250 maraging steels." Materials Science and Engineering: A 454 (2007): 602-607. (Lee,2007).
[9] Reshetov, Aleksey, Olga Bylya, Michal Gzyl, Malgorzata Rosochowska, and Paul Blackwell. "Modelling microstructure evolution in ATI 718Plus alloy." In Key Engineering Materials, vol. 716, pp. 352-359. Trans Tech Publications, 2016. (Reshetov,2016).
[10] Totten, George E., and Maurice AH Howes, eds. Steel heat treatment handbook. CRC Press, 1997.(Totten,1997).
[11] Rao, Muktinutalapati Nageswara, and Krishnan Sivasubramanian. "Significance of Alloying Element Levels in Realizing the Specified Tensile Properties in 18 wt% Nickel Maraging Steel." Materials Sciences and Applications 2, no. 08 (2011): 1116. ( Rao ,2011).
[12] O.I. Bylya, M.K. Sarangi, N.V. Ovchinnikova, R.A. Vasin, E.B. Yakushina, P.L. Blackwell,FEM simulation of microstructure refinement during severe deformation, IOP Conf. Series:Materials Science and Engineering. 63 (2014) doi:10.1088/1757-899X/63/1/012033.(O.I,2014).
[13] Guo, Z., and Wei Sha. "Modelling the correlation between processing parameters and properties of maraging steels using artificial neural network." Computational Materials Science 29, no. 1 (2004): 12-28.(Guo,2004)

Keywords
Heat treatment, Heat treatment modeling, Tensile testing, Prediction of aging time, 18 Ni Maraging steel. Desired 02% yield strength