The Use of Additive Manufacturing in Maritime Industry

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2019 by IJETT Journal
Volume-67 Issue-6
Year of Publication : 2019
Authors : ?ükrü Orçun Ta?, Bekir ?ener
DOI :  10.14445/22315381/IJETT-V67I6P209


MLA Style: ?ükrü Orçun Ta?, Bekir ?ener"The Use of Additive Manufacturing in Maritime Industry" International Journal of Engineering Trends and Technology 67.6 (2019): 47-51.

APA Style:?ükrü Orçun Ta?, Bekir ?ener (2019). The Use of Additive Manufacturing in Maritime Industry International Journal of Engineering Trends and Technology, 67(6), 47-51.

Because of some important advantages, Additive Manufacturing (AM), also known as 3D printing, become more popular and begin to take more place in different sector like aerospace, automotive, healthcare ,etc. Especially, since the filament-based method can easily found and installed at home or at small workshops, AM has also become an area of interest for personal use. Advances in the use of metal additive manufacturing have opened up a lot of possibilities for production. In this paper, authors examine the use of Additive Manufacturing technology in a relatively new field: Maritime industry. Firstly, a piece of general information about AM is given and then the possible usage areas of AM, particularly in the maritime industry are mentioned. The advantages of using AM is evaluated in a wide range from prototype construction to supply chain of spare parts.

[1] S. H. Khajavi, J. Partanen, and J. Holmström, ?Additive manufacturing in the spare parts supply chain,? Comput. Ind., vol. 65, no. 1, pp. 50–63, 2014.
[2] M. Fernandez-Vicente, ?Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing,? vol. 3, no. 3, pp. 183–192, 2016.
[3] F. Johansson, ?Optimizing Fused Filament Fabrication 3D Printing for Durability Tensile Properties & Layer Bonding,? 2016.
[4] K. V. Wong and A. Hernandez, ?A Review of Additive Manufacturing,? ISRN Mech. Eng., vol. 2012, pp. 1–10, 2012.
[5] A. Boschetto, V. Giordano, and F. Veniali, ?3D Eoughness Profile Model In Fused Deposition Modelling,? Rapid Prototyp. J., vol. 19, no. 4, pp. 240–252, 2013.
[6] G. Krolczyk, P. Raos, and S. Legutko, ?Experimental Research of Surface Roughness and Surface Texture After Turning and Fused Deposition Modeling Of Machine Parts,? Teh. Vjesn., vol. 21, no. 1, pp. 217–221, 2014.
[7] L. Lu et al., ?Build-to-last: Strength to Weight 3D Printed Objects,? ACM Trans. Graph., vol. 33, no. 4, pp. 97:1–97:10, 2014.
[8] G. N. Levy and R. Schindel, ?Manufacturing (LM) Technologies , State of the Art and Future,? vol. 2, no. Lm.
[9] A. J. Lopes, E. Macdonald, and R. B. Wicker, ?Integrating Stereolithography and Direct Print Technologies for 3D Structural Electronics Fabrication,? vol. 2, pp. 129–143, 2012.
[10] A. Rosochowski and A. Matuszak, ?Rapid Tooling : The State of the Art,? vol. 106, pp. 191–198, 2000.
[11] B. Mueller and D. Kochan, ?Laminated Object Manufacturing for Rapid Tooling and Patternmaking in Foundry Industry,? Comput. Ind., vol. 39, no. 1, pp. 47–53, 1999.
[12] W. Zhong, F. Li, Z. Zhang, L. Song, and Z. Li, ?Short Fiber Reinforced Composites for Fused Deposition Modeling,? Aesthetic Plast. Surg., vol. 29, no. 3, pp. 181–183, 2005.
[13] X. Wang and T. Laoui, ?Lasers and Materials in Selective Laser Sintering,? vol. 23, no. 4, pp. 357–371, 2006.
[14] J. Holmström, J. Partanen, J. Tuomi, and M. Walter, ?Rapid Manufacturing in The Spare Parts Supply Chain: Alternative Approaches to Capacity Deployment,? J. Manuf. Technol. Manag., vol. 21, no. 6, pp. 687–697, 2010.
[15] P. Markillie, ?A third industrial revolution," 2012.

Industry 4.0, Additive Manufacturing, 3D Printing, Maritime Industry.