Hydrodynamic Analysis of Ship Resistance following ITTC Method and Star CCM+
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2019 by IJETT Journal|
|Year of Publication : 2019|
|Authors : Sharadindu Bikash Majumdar, Dr. Asis Mazumdar
|DOI : 10.14445/22315381/IJETT-V67I8P202|
MLA Style: Sharadindu Bikash Majumdar, Dr. Asis Mazumdar"Hydrodynamic Analysis of Ship Resistance following ITTC Method and Star CCM+" International Journal of Engineering Trends and Technology 67.8 (2019): 14-18.
APA Style:Sharadindu Bikash Majumdar, Dr. Asis Mazumdar. Hydrodynamic Analysis of Ship Resistance following ITTC Method and Star CCM+International Journal of Engineering Trends and Technology, 67(8), 14-18.
In ship design, hydrodynamics play a vital role which is conventionally solved by towing tank experiment in laboratory followed by ITTC methods for resistance calculations, causing a higher expense. But nowadays, due to development in the technological R&D, these experiments can also be performed in CFD simulation software in computers creating more financial savings by reducing the experimental setup in the laboratory. In the present study, an attempt has been taken to compare results obtained analytically from model test in the towing tank in a marine laboratory with computational results of the model obtained from simulation software, Star CCM+. It has been found that there is a fairly satisfactory similarity in the results obtained from the analytical and the computational methods practised in the present study.
 Baar, J. J. M., “A Three Dimensional Linear Analysis of Steady Ship Motion in Deep Water”, Ph.D. Thesis, Brunel University, U. K., p 6-15, Nov. 1986.
 (2015) The ITTC website. [Online]. Available: https://ittc.info/media/2021/75-02-02-02.pdf [
3] Technology Focus, “Naval Test Facilities”, Bulletin of DRDO, ISSN: 0971-4413, Vol.22, No.1, Feb., 2014.
 Marco, A. D., Mancini, S., Miranda, S., Scognamiglio, R., and Vitiello, L., “Experimental and numerical hydrodynamic analysis of a stepped planning hull”, Applied Ocean Research, Vol. 64, p 135-154, 2017.
 Smoker, B., “Escort Tug Performance Prediction: A CFD Method”, Master of Applied Science Dissertation, Univ. of Victoria, 2012.
 Wieghardt, K., “Review of Contributions to the 12th ITTC on Viscous Resistance”, Resistance Session, Univ. of Hamburg, p 86-87, 1969.
 Asen, P., “Analysis of the Flow around a Cruise Ferry Hull by the Means of Computational Fluid Dynamics”, M. S. (Tech.) Thesis, School of Engineering, Aalto University, Espoo, p 8-17, 2014.
 Marzi, J., “Targeted Advanced Research for Global Efficiency of Transportation Shipping (TARGETS)”, Report No. M 40 (36), Hamburg, 2014.
 Atreyapurapu, K., Tallapragada, B., and Voonna, K., “Simulation of a Free Surface Flow over a Container Vessel Using CFD”, International Journal of Engineering Trends and Technology (IJETT), Vol. 18, No. 7, p 334-339, Dec. 2014.
 Khan, R. S., and Umale, S., “CFD Aerodynamic Analysis of Ahmed Body”, International Journal of Engineering Trends and Technology (IJETT), Vol. 18, No. 7, p 301-308, Dec. 2014.
 (2015) The ITTC website. [Online]. Available: https://fenix.tecnico.ulisboa.pt/downloadFile/3779577315265/RP_Lecture6and7.pdf
 (2015) Ship Resistance and Propulsion.[Online]. Available: http://textofvideo.nptel.ac.in/114106026/lec10.pdf
Hydrodynamics, Towing Tank, ITTC, CFD, Star CCM+