Hardware Implementation of Non-isolated Sextuple Output Hybrid Converter

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2019 by IJETT Journal
Volume-67 Issue-11
Year of Publication : 2019
Authors : Harshal D. Vaidya, Dr. S. M. Badave, Ruchita P. Dahad
DOI :  10.14445/22315381/IJETT-V67I11P228


MLA Style: Harshal D. Vaidya, Dr. S. M. Badave, Ruchita P. Dahad "Hardware Implementation of Non-isolated Sextuple Output Hybrid Converter" International Journal of Engineering Trends and Technology 67.11 (2019):174-183.

APA Style:Harshal D. Vaidya, Dr. S. M. Badave, Ruchita P. Dahad. Hardware Implementation of Non-isolated Sextuple Output Hybrid Converter  International Journal of Engineering Trends and Technology, 67(11),174-183.

A new derivative of DC-DC converter without isolation with the help of conventional dc-dc converters fit for renewable energy and high-voltage applications. Integration of switched inductor circuit in power circuit lifts the voltage. And so, it overpowers the parasitic effects of the circuit components. Conventional DC-DC converters like SEPIC, Cuk, Zeta, Boost, etc., are employed for renewable energy and industrial applications. However they suffer from parasitic effects with reduced output voltage, and limited with low efficiency. These problems are overruled by the nonisolated DC-DC output converter for augmenting the output voltage. This converter is having single semiconductor switch without any isolation and able to supply high output with varying duty cycle. A simulation of converter capable of sextuple DC outputs from single DC input with varying duty ratio is presented. Additionally, an experimental prototype with six different output voltages based on a Single- Ended Primary Inductance (SEPIC)-Cuk-Zeta combination is developed.


[1] Sanjeevikumar, Mahajan Sagar Bhaskar, Pranav Dhond, Frede Blaabjerg and Michael Pecht, „Non-Isolated Sextuple Output Hybrid Triad Converter Configurations for High Step-Up Renewable Energy Applications?, Advances in Power Systems and Energy Management, Lecture Notes in Electrical Engineering, Springer, Vol. 436., pp.1-12, 2018.
[2] Harshal D. Vaidya and Ruchita P. Dahad, “Non-isolated Sextuple Output Hybrid Converter Configuration”, International Journal of Power Electronics Controllers and Converters (IJPECC), Vol. 5: Issue 1, pp 19-27, 2019
[3] Patra, P., Patra, A., Misra, N.: A single inductor multiple output switcher with simultaneous Buck, Boost and inverter outputs. IEEE Trans. Power Electron. 27(4), 1936–1951 (2012)
[4] Wai, R.J., Jheng, K.H.: High-efficiency single-input multiple-output DC-DC converter. IEEE Trans. Power Electron. 28(2), 886–898 (2013)
[5] Nami, A., Zare, F., Ghosh, A, Blaabjerg, F.: Multi-output DC-DC converters based on diode clamped converts configuration: topology and control strategy. IET Power Electron. 3(2), 197–208 (2010)
[6] Dietrich, S., Strache, S., Wunderlich, R., Heinen, S.: Get the LED out: experimental validation of a capacitors-free single-inductor, multiple-output LED driver topology. IEEE Ind. Electron. Mag. 9(2), 24–35 (2015)
[7] Ma, D., Ki, W.H., Tsui, C.Y., Mok, P.K.: Single inductor multiple-output switching converters with timemultiplexing control in discontinuous conduction mode. IEEE J. Solid State Circuits 38(1), 89–100 (2003)
[8] Huang, M.H., Chen, K.H.: Single-inductor multi-output (SIMO) DC-DC converter with highlighted-load efficiency and minimized cross regulation for portable devices. IEEE J. Solid-State Circuits 44(4), 1099–1111 (2009)
[9] Kwon, D., Rincon-Mora, G.A.: Single-inductor-multipleoutput switching DC-DC converters. IEEE Trans. Circuits Syst. II Exp. Briefs 56(8), 614–618 (2009)
[10] Qian, Z., Abdel-Rahman, O., Al-Atrash, H., Bataresh, I.: Modeling and control of three-port DC/DC converter interface for satellite applications. IEEE Trans. Power Electron. 25(3), 637–649 (2010)
[11] Behjati, H., Davoudi, A.: A Multiple-input multiple output DC-DC converter. IEEE Trans. Ind. Appl. 49(3), 1464– 1479 (2013)
[12] Tong, Y., Shan, Z., Jatskevich, J., Davoudi, A.: A nonisolated multiple-input multiple-output DC-DC converter for DC distribution of future energy efficient homes. In: Proceedings of IEEE 40th Annual Conference on Industrial Electronics Society (2014)
[13] Kim, H.-S., Jung, J.-H., J.-W. B, Kim, H.-J.: Analysis and design of a multioutput converter using asymmetrical PWM half-bridge flyback converter employing a parallelseries transformer. IEEE Trans. Ind. Electron. 60(8), 3115–3125 (2013)
[14] Mullett, C., Cathell, F.: Improving the regulation of multi output flyback converters. In: Proceedings of IEEE APEC, pp. 1923–1926. Washington, USA (2009)
[15] Jabbari, M., Farzanehfard, H.: Family of soft-switching resonant DC-DC converters. IET Power Electron. 2(2), 113–124 (2009)
[16] Boora, A.A., Zare, F., Ledwich, G., Ghosh, A.: A new DC-DC converter with multi output: topology and control strategies. EPEPEMC (2008)
[17] Mahajan, S.B., Sreeramula Reddy, N., Pavan Kumar, R.K.: A novel non isolated switched inductor floating output DC-DC multilevel boost converter for fuel cell applications. In: IEEE Students’ Conference on Electrical, Electronics and Computer Sciences (IEEE-SCEECS), Bhopal (2014)
[18] Mahajan S.B., Rishi, K., Anita, K., Pooja, C.: Non isolated switched inductor SEPIC converter topologies for photovoltaic boost applications. In: IEEE International Conference on Circuit, Power and Computing Technologies (IEEE-ICCPCT), Nagarcoil (2016)
[19] Mahajan, S.B., Rishi, K., Sanjeevikumar, P., Siano, P., Blaabjerg, F.: Hybrid non-isolated and non-inverting Nx interleaved DC-DC multilevel boost converter for renewable energy applications. In: The 16th IEEE International Conference on Environment and Electrical Engineering, (IEEE-EEEIC’16), Florence, Italy (2016)
[20] Mahajan, S.B., Rishi, K., Sanjeevikumar, P., Blaabjerg, F., Viliam, F., Mihai, C.: Non isolated and non-inverting cockcroft walton multiplier based hybrid 2Nx interleaved boost converter for renewable energy applications. In: IEEE Conference on 17th the Power Electronics and Motion Control, (IEEE-PEMC’16), Europe (2016)
[21] Sanjeevikumar, P., Kabalci, E., Iqbal, A., Abu-Rub, H., Ojo, O.: Control strategy and hardware implementation for DC-DC boost power conversion based on proportionalintegral compensator for high voltage application. Engg. Sci. Tech. Intl. J. (JESTECH). Elsevier J. 18 (2), 163–170 25 (2014)
[22] Sanjeevikumar, P., Iqbal, A., Abu-Rub, H.: Implementation and control of extra high voltage DC-DC boost converter. In: The 7th IET International Conference on Sustainable Energy and Intelligent System, IETSEISCON ‘14, Chennai (India) (2013)
[23] Mahajan, S.B., Sanjeevikumar, P., Ojo, O., Rivera, M., Kulkarani, R.: Non-isolated and inverting Nx multilevel boost converter for photovoltaic DC link applications. IEEE ICA/ACCA, Chile (2016)
[24] Mahajan, S.B., Sanjeevikumar, P., Blaabjerg, F., Ojo, O., Seshagiri, S., Kulkarni, R.: Inverting Nx and 2Nx nonisolated multilevel boost converter for renewable energy applications. 4th IET, CEAT, Kuala Lumpur, Malaysia (2016)
[25] Mahajan, S.B., Sanjeevikumar, P., Wheeler, P., Blaabjerg, F., Rivera, M., Kulkarni, R.: XY converter family: a new breed of buck boost converter for high step-up renewable energy applications. In: IEEE-ICA/ACCA, Chile (2016).
[26] Charanasomboon, T, ‘Single switch dual output dc-dc converter performance’, IEEE Transactions on Power Electronics, vol. 5, no. 2, pp. 241-245, 1990
[27] Xu, W, Zhu, X, Hong, Z & Killat, D, ‘Design of singleinductor dual-output switching converters with average current mode control’, Proceedings of IEEE Asia-Pacific conference on circuits and systems, pp. 902–905.,2008
[28] Xu, WW, Li, Y, Gong, XH, Hong, ZL & Killat, D, ‘A dual-mode single-inductor dual-output switching converter with small ripple’, IEEE Transactions on Power Electronics, vol. 25, no. 3, pp. 614–623, 2010
[29] Branca, X, Allard, B, Lin-Shi, X & Chesneau, D, ‘Single- Inductor Bipolar-Outputs Converter for the Supply of Audio Amplifiers in Mobile Platforms’, IEEE Transactions On Power Electronics, vol. 28, no. 9, pp. 4248-4259, 2013
[30] Ramya.A, Sundararaman.K and Gopalakrishnan.M,’ Analysis and Simulation of a Modified Single-Switch Bi- Polar Multi-Output Converter’, 2014 IEEE Conference on Power and Energy Systems: Towards Sustainable Energy (PESTSE 2014), pp. 1-6, 2014
[31] Ray, O, Josyula, AP, Mishra, S & Joshi, A 2015, ‘Integrated Dual-Output Converter’, IEEE Transactions on Industrial Electronics, vol.62, no. 1, pp. 371-382.
[32] Pandav Kiran Maroti, Sanjeevikumar Padmanaban, Patrick Wheeler, Frede Blaabjerg and Marco Rivera, ‘Modified Boost with Switched Inductor Different Configurational Structures for DC-DC Converter for Renewable Application’, 3rd IEEE Annual Southern Hemisphere Power Electronics conference, Dec. 2017 pp. 167-172

Sextuple output-Non-isolated-Single semiconductor switch-SEPIC-Cuk-Zeta