Effect of Poisson's Ratio for Liner Material on Performance of Journal Bearing under Micropolar Lubrication

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2020 by IJETT Journal
Volume-68 Issue-8
Year of Publication : 2020
Authors : Pikesh Bansal, Manish Saraswat, Kamal Sharma, Nathiram Chauhan
DOI :  10.14445/22315381/IJETT-V68I8P211S

Citation 

MLA Style: Pikesh Bansal, Manish Saraswat, Kamal Sharma, Nathiram Chauhan  "Effect of Poisson's Ratio for Liner Material on Performance of Journal Bearing under Micropolar Lubrication" International Journal of Engineering Trends and Technology 68.8(2020):58-61. 

APA Style:Pikesh Bansal, Manish Saraswat, Kamal Sharma, Nathiram Chauhan. Effect of Poisson's Ratio for Liner Material on Performance of Journal Bearing under Micropolar Lubrication  International Journal of Engineering Trends and Technology, 68(8),58-61.

Abstract
Journal bearing is integral part of rotating machinery in order to support load of components and provide proper alignment to machinery. Failure of bearing is evident because of metal to metal contact under certain operating conditions. However, bearing are provided with flexible liners in order to reduce cost of failure. This leads to deformation of liner during operation of machinery. Performance characteristics are influenced due to this deformation of bearing liner.

Reference

[1] G.R. Hinggison, “The theoretical effects of elastic deformation of the bearing liner on journal bearing performance”. Proc. Symp. Elastohydrodynamic Lubrication IMechE London (UK) 180 31-37 (1966).
[2] J. O’Donoghue, D.K. Brighton, C.J.K. Hooke, “The effect of elastic distortions on journal bearing performance”. J. Lubr. Tech. 89 409-415 (1967).
[3] D.K. Brighton, C.J.K. Hooke, J. O’Donoghue, “Theoretical and experimental investigation of the effect of elastic distortions on the performance of journal bearing”. Trib. Conv., Proc. IMechE 182 192-200 (1967).
[4] H.D. Conway, H.C. Lee, “The analysis of the lubrication of a flexible journal bearing”. J. Lubr. Tech. 97 599-604 (1975).
[5] B.C. Majumder, D.E. Brewe, M.M. Khonsari, “Stability of a rigid rotor supported on flexible oil journal bearing”. Trib. Trans. 110 181-187 (1988).
[6] A.C. Eringen, “Theory of micropolar fluids”. J. Math. Mech. 16 1-18 (1966).
[7] S. Allen, K. Kline, “Lubrication theory of micropolar fluids”. J. Lubr. Tech. 38 646-650 (1971).
[8] J. Prakash, P. Sinha, “Lubrication theory of micropolar fluids and its application to a journal bearing”. Int. J. Engng. Sci. 13 217-232 (1975).
[9] C. Singh, P. Sinha, “The three dimensional Reynolds equation for micropolar fluid lubricated bearings”. Wear 76 199-209 (1982).
[10] M.M. Khonsari, D.E. Brewe, “On the performance of finite journal bearings lubricated with micropolar fluids”. STLE Trib. Trans. 32 155-160 (1989).
[11] S. Das, S.K. Guha, A.K. Chattopadhyay, “On the conical whirl instability of hydrodynamic journal bearings lubricated with micropolar fluids”. Proc. Inst. Mech. Engng. part-J, J. Engng. Trib. 215 431-439 (2001).
[12] S. Das, S.K. Guha, A.K. Chattopadhyay, “On steady state performance of misaligned hydrodynamic journal bearings lubricated with micropolar fluids”. Trib. Int. 35 201-210 (2002).
[13] X.L. Wang, K.Q. Zhu, “A study of the lubricating effectiveness of micropolar fluids in a dynamically loaded journal bearing”. Trib. Int. 37 481-490 (2004).
[14] X.L. Wang, K.Q. Zhu, .: “Numerical analysis of journal bearings lubricated with micropolar fluids including thermal and cavitating effects”. Trib. Int. 39 227-237 (2006).
[15] S. Verma, V. Kumar, K.D. Gupta, “Analysis of multirecess hydrostatic journal bearings operating with micropolar lubricant”. J. of Trib. 131 021103-1-9 (2009).
[16] J.R. Lin, T.L. Chou, L.J. Liang, T.C. Hung, “Non-Newtonian dynamics characteristics of parabolic-film slider bearings: Micropolar fluid model”. Trib. Int. 48 226-231 (2012).
[17] S.C. Sharma, A.K. Rajput, “Effect of geometric imperfections of journal on the performance of micropolar lubricated 4-pocket hybrid journal bearing”. Trib. Int. 60 156-168 (2013).
[18] S. Das, S.K. Guha, “On the Steady-State Performance Characteristics of Finite Hydrodynamic Journal Bearing under Micro-Polar Lubrication with Turbulent Effect”. Int. J of Mech. and Mechatronics Engg. 7(4) 654-662 (2013).
[19] P. Bansal, A.K. Chattopadhayay, V.P. Agrawal, “Linear Stability Analysis of Hydrodynamic Journal Bearings with a Flexible Liner and Micropolar Lubrication. Tribol”. Transc. 58 316-326 (2015).
[20] P. Bansal, A.K. Chattopadhayay, V.P. Agrawal, “Steady State Performance Characteristics of Micropolar Lubricated Hydrodynamic Journal Bearings with Flexible Liner”. J. of inst. of engr. (India) Series C 97(2) 195-207 (2016).
[21] K. Budheeja, S. Verma, “A Study on the Influence of Combined Elastic and Micropolar Effects on Hole-Entry Hybrid Journal Bearing. Tribol.” Online 13(2) 20-35 (2018).
[22] O. Pinkus, B. Sternlicht, “Theory of Hydrodynamic Lubrication”. McGraw Hill NY 1961.
[23] V.G. Rekach, “Manual of theory of elasticity”. MIR publisher Moscow, 1979.
[24] L. Floberg, “Boundary Condition of Cavitation Regions in Journal Bearings”. Trans. ASLE 4 282-286 (1961).

Keywords
Liner Material, Micropolar Lubrication