Study of Fatigue Life on Aluminium Composites-Fly Ash Received T6 Heat Treatment and Artificial Aging
Citation
MLA Style: Zainun Achmad, Al Emran Ismail, Mohd Azhar Harimon "Study of Fatigue Life on Aluminium Composites-Fly Ash Received T6 Heat Treatment and Artificial Aging" International Journal of Engineering Trends and Technology 69.2(2021):12-18.
APA Style:Zainun Achmad, Al Emran Ismail, Mohd Azhar Harimon. Study of Fatigue Life on Aluminium Composites-Fly Ash Received T6 Heat Treatment and Artificial Aging International Journal of Engineering Trends and Technology, 69(2),12-18.
Abstract
In the manufacture of aluminium composites, reinforcement in the form of coal base ash, which has been through an electroless process, is needed, which functions to coat the fly ash so that it sticks to the aluminium metal during casting. The strength of the aluminium alloy material does not only depend on the concentration of the alloy metal but also how the process is treated until the aluminium is ready for use. Heat treatment of T6 with a dissolving temperature of 510 ° C for 1 hour and 2 hours and continued with artificial aging at 120 ° C, 140 ° C and 160 ° C was held for 2 hours. Fatigue is a major cause of the malfunction. From the fatigue test, the highest fatigue life with a load of 087 ?u can be seen in the specimens that received heat treatment of T6 510 ° C with a dissolving hold time of 1 hour and an aging temperature of 120 ° C for 2 hours, namely 3. 466 cycles and the lowest fatigue life in specimens that received heat treatment of T6 510 ° C with a dissolving hold time of 2 hours and an aging temperature of 160 ° C for 2 hours, namely 440 cycles. The highest fatigue life with load ?y is seen in the specimens that received heat treatment of T6 510 ° C with a dissolving time of 1 hour and an aging temperature of 140 ° C for 2 hours, namely 32,566 cycles and the lowest fatigue life in specimens that received heat treatment T6 510 ° C with a dissolving hold time of 2 hours and an aging temperature of 160 ° C for 2 hours, namely 11,333 cycles.
Reference
[1] Schwartz, M., Composite Material Processing Fabrication and Applications. USA: Prentice-Hall.,(1997).
[2] Suseno., H, Prastumi., Susanti, L., & Setyowulan, D, The effect of using bottom ash as a substitute for clay in a mixture of brick on the compressive strength of brick. (2012).
[3] Zulfia, A., & Hand, RJ, The Production of Al-MgAlloy / SiCMetal Matrix Composite by Pressureless Infiltration, UI Depok Jakarta, (2002).
[4] Napolion, Alvian., InfluencProcess Heat Treatment and Shot Peening to Increased Leaf Spring Fatigue Life (JIS G 4801). (1992)
[5] Mochtar, et al., Design, Machine Elements in Mechanical, 2nd edition. Yogyakarta: Andi Publisher (2007).
[6] Setiawan, Adhi., Nilasari, Arita R., & Ari, M. Analysis of Mechanical Properties of Al 2075 Reinforcement Composites with Coal Base Ash Electroless. (2016).
[7] Surdia, T., & Saito, S., Knowledge of Technical Materials, Pradya Paramita, Jakarta, (1992).
[8] Gibson, Ronald F., Principles of Composite Material Mechanics, Mc Graw Hill Inc, New York. (1994).
[9] Dieter, George E., Mechanical Metallurgy, Third edition, translation by Sriati Djafrie, Erlangga, Jakarta. 1(1992).
[10] Schonmetz, S., & Reiter, H. Metal Working with Machines, Angkasa, Bandung, (1990).
[11] Smith, F. William., Material Science and Engineering. (Secong Edition). New York: Mc Graw Hill Inc. (1995).
[12] Van, Vlack. Materials Science and Technology. Erlangga. Jakarta. (2005).
[13] ASTM E466., Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Test of Metallic Material, United States. (2002).
[14] International For Use os UNO`S, High Temperature Rotating Banding Fatigue Testing Machine, Model H6.
[15] Surdia, Tata., & Shinroku, Saito., Engineering Materials Knowledge. Jakarta: PT Dainippon Gitakarya Printing., (1985).
[16] Ahmad, Zainun, Machine Element 1. PT Refika Aditama. Bandung. (2006).
[17] Zainun Achmad Karmo Main, Al Emran Ismail, Potential Applications of Fly-Ash and Sisal Hybrid Fiber Reinforced Plastic Composites, International Journal of Engineering Trends and Technology, 68(7)(2020) 34-41.
[18] Zainun Achmad, Sony Setiawan, Analysis of the Effect of Addition of Cu and Variation of Melting Temperature on Mechanical Properties of Piston Heads, Mechanics: Journal of Mechanical Engineering, 3(2017) 23-31.
[19] Zainun Ahmad, Edi Santoso, Micro Structure of Al 6061 Composite Castings + Coal Ash After T6 Treatment, Jhp17 Journal of Research Results Lppm Untag Surabaya 01(01)(2016) 93 - 104.
[20] Zainun Achmad, Study the Fault Model Experiment in Al 6061-Abu DAsar Coal that Receives Heat Treatment, Mechanics: Journal of Mechanical Engineering, 1(2)(2015).
[21] Zainun Achmad, Analysis of the Effect of Electrolyte Stress and Temperature on the Quality of Al 6061 Composite Staining - Coal Ash, Proceedings of the 2015 10th National Seminar on Retii.
[22] Zainun, Edi Santoso, Abdul Jalil, Analysis of The Effect of Cooling Media Variation and Variation of Cooling Media Temperature on T6 Process Solution Treatment On Shape And Propeler Dimension Changes From Coal Based Aluminium-Ash Composite Materials, Proceedings of Snttm Xvii, Isbn (2018) 161-165 2623-6313.
[23] HC Anilkumar, HS Hebbar, and KS Ravishankar Mechanical Properties Of Fly Ash Reinforced Aluminium Alloy (Al6061) Composites, International Journal Of Mechanical And Materials Engineering (Ijmme), 6(1)(2011) 41-45.2011.
[24] Prathamesh Mhamane, Shubham Kadam, Viraj Phanse, SB Bhosale, Materials on a Diet: Study and Investigation of Aluminium - Fly Ash Metal Matrix Composite, Materials Today: Proceedings, 24, 2302-2308, 2020.
[25] Adarsh Patil, NR Banapurmath, AM Hunashyal, Shankar Hallad, Enhancement of mechanical properties by the reinforcement of Fly ash in aluminium metal matrix composites. Materials Today: Proceedings 24(2020) 1654–1659.
[26] Pramod Kumar, Satpal Sharma, Bhaskar Chandra Kandpal, Synthesis and mechanical characterization of biomass fly ash strengthened aluminium matrix composites, Elsevier Ltd. All rights reserved. Selection and of the scientific committee of the 10th International Conference of Materials Processing and Characterization. (2019).
[27] Z. Ahmad, E Santoso, Micro Structure of Al 6061 Castings Reinforcing Fly Ash After Getting T6 Heat Treatment, http://jurnal.untagsby.ac.id/index.php/jhp17, (2015).
[28] Z. Achmad, Analysis of the Effect of Electrolyte Stress and Temperature on the Quality of Al 6061 Composite Staining with Fly Ash Reinforcement, ReTII, http://journal.itny.ac.id/index.php/ReTII/article/view/389, (2016).
[29] Z Achmad, P Hendrawan, Experiments Study Faltigue life of Aluminum Shaft 6061- Coal Base Ash That Receives Heat Treatment, http://jurnal.untagsby.ac.id/index.php/MEKANIKA, 2015.
[30] Z Achmad, Modeling and change kinetics of micro-structure AI 6061 – Fly Ash, Universitas 17 Agustus 1945 Surabaya 1(2009) 92.
[31] Z Achmad, S Setiawan, Analysis of the Effect of Addition of Cu and Variation of Melting Temperature on the Mechanical Properties of Piston Heads, http://jurnal.untag-sby.ac.id/index.php/MEKANIKA 3 (01)(2017) 23-31.
[32] Z Achmad, E Santoso, A Jalil, Analysis of The Effect of Cooling Media Variation And Variation of Cooling Media Temperature on T6 Process Solution Treatment on Shape And Propeler Dimension Changes From Coal. SNTTM XVI 16(5)(2018).
[33] Ismail, A.E, Mohd Tobi A.L, Axial energy absorption of woven kenaf fiber-reinforced composites, ARPN Journal of Engineering and Applied Sciences,11(14)(2016) 8668–8672.
[34] Ismail, A.E., Zainulabidin, M.H., Roslan, M.N., Mohd Tobi, A.L., Muhd Nor, NH, Effect of velocity on the impact resistance of woven jute fiber-reinforced composites, Applied Mechanics and Materials, 2014, 465-466, pp. 1277–1281.
[35] Ismail, A.E., Awang, M.K., Sa`At, M.H., Tensile strength of natural fiber reinforced polyester composite, AIP Conference Proceedings, 909(2007) 174–179.
[36] Redankamma Yenumula, Srinivasulu Dorasila, CV Ramana Murthy Naidu S, Rambabu Kalpukuri, Experimental Investigation of Mechanical Properties of Pure Al-Sic Metal Matrix Composite by Stir Casting Method, International Journal of Engineering Trends and Technology (IJETT), 59(3),148-154 , 2018.
[37] Ismail, A.E., Che Abdul Aziz, MA, Fatigue strength of woven kenaf fiber-reinforced composites, IOP Conference Series: Materials Science and Engineering, 100(1) (2015) 012037.
[38] Ismail, A.E., Sadikin, A., Rahman, M.N.A., Mahzan, S., Salleh, S.M., Ahmad, S., Ridzuan, M.B., Crushing performances of axially compressed Woven Kenaf Fiber-reinforced cylindrical composites, International Journal of Integrated Engineering, 10(1) (2018) 189-195.
Keywords
Aluminium, fly ash, Composite, Electroless Platting, Fatigue