Investigating Mechanical Properties of Composites of ADC12 alloy with Sic and Flyash As Filler Materials
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2021 by IJETT Journal|
|Year of Publication : 2021|
|Authors : Maraparambil Ramachandran, Dr.KThirunavukarasu, Dr.V.R. Pramod
|DOI : 10.14445/22315381/IJETT-V69I3P217|
MLA Style: Maraparambil Ramachandran, Dr.KThirunavukarasu, Dr.V.R. Pramod "Investigating Mechanical Properties of Composites of ADC12 alloy with Sic and Flyash As Filler Materials" International Journal of Engineering Trends and Technology 69.3(2021):103-107.
APA Style:Maraparambil Ramachandran, Dr.KThirunavukarasu, Dr.V.R. Pramod. Investigating Mechanical Properties of Composites of ADC12 alloy with Sic and Flyash As Filler Materials International Journal of Engineering Trends and Technology, 69(3),103-107.
The coal industry produces a significant amount of Fly-ash, which poses a crucial environmental concern. Reusing is the best solution to tackle such industrial by-products. In this study, composites of ADC12 alloy with Sic and Fly-ash as the filler material are made by the squeeze casting method. Mechanical properties of the composites varied with composition, the pressure applied to squeeze, alloy melting temperature, and temperature maintained on the die are studied. This work proposes a route to reduce the industrial by-product without much compromise in the mechanical property of the composite.
 R. Casati, M. Vedani, Metal Matrix Composites Reinforced by Nano-Particles—A Review, Metals, 4 (2014) 65.
 T. Dursun, C. Soutis, Recent developments in advanced aircraft aluminum alloys, Materials & Design 56(2014) 1980-2015 862-871.
 M.O. Bodunrin, K.K. Alaneme, L.H. Chown, Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics, Journal of Materials Research and Technology, 4 (2015) 434-445.
 E. Schubert, M. Klassen, I. Zerner, C. Walz, G. Sepold, Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industry, Journal of Materials Processing Technology, 115(2001) 2-8.
 M. Qian, X. Xu, Z. Qin, S. Yan, Silicon carbide whiskers enhance mechanical and anti-wear properties of PA6 towards potential applications in aerospace and automobile fields, Composites Part B: Engineering, 175 (2019) 107096.
 J. Singh, A. Chauhan, Overview of wear performance of aluminum matrix composites reinforced with ceramic materials under the Influence of controllable variables, Ceramics International, 42(2016) 56-81.
 M.Z. Ibrahim, A.A.D. Sarhan, T.Y. Kuo, F. Yusof, M. Hamdi, T.M. Lee, Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants, Surface and Coatings Technology, 392(2020) 125755.
 I. Kartikeya Sarma, V. Srinivas, S. Kanmani Subbu, Comparison of wear and corrosion resistance behavior of LENS TM deposited SS 316L alloy and wrought alloy, Materials Today: Proceedings, (2020).
 D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, ?. Lamikiz, G.I. Prokopenko, M.O. Iefimov, K.E. Grinkevych, Combining laser transformation hardening and ultrasonic impact strain hardening for enhanced wear resistance of AISI 1045 steel, Wear, 462-463 (2020) 203494.
 D. Zhou, F. Qiu, Q. Jiang, Simultaneously increasing the strength and ductility of nano-sized TiN particle reinforced Al–Cu matrix composites, Materials Science and Engineering: A, 596(2014) 98-102.
 A. Jahangiri, S.P.H. Marashi, M. Mohammadaliha, V. Ashofte, The effect of pressure and pouring temperature on the porosity, microstructure, hardness, and yield stress of AA2024 aluminum alloy during the squeeze casting process, Journal of Materials Processing Technology, 245(2017) 1-6.
 N. Souissi, S. Souissi, C. Niniven, M. Amar, C. Bradai, F. Elhalouani, Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method, Metals, 4(2014) 141.
 M.R. Ghomashchi, A. Vikhrov, Squeeze casting: an overview, Journal of Materials Processing Technology, 101(2000) 1-9.
 L.J. Yang, The effect of casting temperature on the properties of squeeze cast aluminum and zinc alloys, Journal of Materials Processing Technology, 140(2003) 391-396.
 O. Beffort, S. Long, C. Cayron, J. Kuebler, P.-A. Buffat, Alloying effects on microstructure and mechanical properties of high volume fraction SiC-particle reinforced Al-MMCs made by squeeze casting infiltration, Composites Science and Technology, 67(2007) 737-745.
 R. Srinivasan, B. Suresh Babu, M. Mohamed Shufiyan, A. Mohammed Thoufeeq, S. Mohan Sanjay, S. Keerthi Varman, Experimental investigation on tribological behavior of aluminum hybrid metal matrix composites processed through stir cum squeeze casting technique, Materials Today: Proceedings, 27(2020) 1756-1760.
 C. Zhao, H. Xu, Z. Ji, W. Liu, M. Hu, B. Jiang, Effect of near-liquidus squeeze casting temperature on microstructure and mechanical property of AZ91D alloy differential support, Materials Letters, 270(2020) 127681.
 Y. Zhang, G. Wu, W. Liu, L. Zhang, S. Pang, Y. Wang, W. Ding, Effects of processing parameters and Ca content on microstructure and mechanical properties of squeeze casting AZ91–Ca alloys, Materials Science and Engineering: A, 595(2014) 109-117.
 C. Lin, S.-s. Wu, S.-l. LÜ, H.-b. Wu, H.-x. Chen, Influence of high pressure and manganese addition on Fe-rich phases and mechanical properties of hypereutectic Al?Si alloy with rheo-squeeze casting, Transactions of Nonferrous Metals Society of China, 29(2019) 253-262.
 D. Yuan, X. Yang, S. Wu, S. Lü, K. Hu, Development of high strength and toughness nano-SiCp/A356 composites with ultrasonic vibration and squeeze casting, Journal of Materials Processing Technology, 269(2019) 1-9.
 M. Patel G C, A.K. Shettigar, M.B. Parappagoudar, A systematic approach to model and optimize wear behavior of castings produced by squeeze casting process, Journal of Manufacturing Processes, 32(2018) 199-212.
 K.N.P. Prasad, M. Ramachandra, Determination of Abrasive Wear Behaviour of Al-Fly ash Metal Matrix Composites Produced by Squeeze Casting, Materials Today: Proceedings, 5(2018) 2844-2853.
 J. David Raja Selvam, D.S. Robinson Smart, I. Dinaharan, Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by composting, Materials & Design, 49(2013) 28-34.
 W.A. Uju, I.N.A. Oguocha, A study of thermal expansion of Al- Mg alloy composites containing fly ash, Materials & Design, 33(2012) 503-509.
 S. Janudom, T. Rattanochaikul, R. Burapa, S. Wisutmethangoon, J. Wannasin, Feasibility of semi-solid die casting of ADC12 aluminum alloy, Transactions of Nonferrous Metals Society of China, 20(2010) 1756-1762.
 M.J. Corinthios, Y. Geadah, 1-D and 2-D algorithms for orthogonal transformations, Mathematics and Computers in Simulation, 27(1985) 441-452.
 J. Singh, A. Chauhan, Influence of Reinforcement Parameters and Ageing Time on Mechanical Behavior of Novel Al2024/SiC/Red Mud Composites Using Response Surface Methodology, JOM, (2017).
 D. Das, S. Pattanaik, B.C. Routara, P.C. Mishra, C. Samal, Dry sliding wear behavior of SiCp reinforced Zn-Mg-Cu based aluminum matrix composite, Materials Today: Proceedings, 4(2017) 2965-2974.
 A. Maleki, B. Niroumand, A. Shafyei, Effects of squeeze casting parameters on density, macrostructure, and hardness of LM13 alloy, Materials Science and Engineering: A, 428(2006) 135-140.
 P. Senthil, K.S. Amirthagadeswaran, Optimization of squeeze casting parameters for non-symmetrical AC2A aluminum alloy castings through Taguchi method, Journal of Mechanical Science and Technology, 26(2012) 1141-1147.
ADC12 alloy, Fly-ash, Silicon Carbide, Squeeze casting.