Efficiency Improvement of Radial Flux Permanent Magnet Brushless DC Motor Using Hiperco Magnetic Material

Efficiency Improvement of Radial Flux Permanent Magnet Brushless DC Motor Using Hiperco Magnetic Material

  IJETT-book-cover           
  
© 2021 by IJETT Journal
Volume-69 Issue-5
Year of Publication : 2021
Authors : Tejas H. Panchal, Rajesh M. Patel, Amit N. Patel
DOI :  10.14445/22315381/IJETT-V69I5P210

How to Cite?

Tejas H. Panchal, Rajesh M. Patel, Amit N. Patel, "Efficiency Improvement of Radial Flux Permanent Magnet Brushless DC Motor Using Hiperco Magnetic Material," International Journal of Engineering Trends and Technology, vol. 69, no. 5, pp. 57-61, 2021. Crossref, https://doi.org/10.14445/22315381/IJETT-V69I5P210

Abstract
Performance enhancement of permanent magnet brushless dc motor during design is highly desirable. With the application of superior magnetic material Hiperco in place of traditional magnetic material M19 silicon steel, the performance of the permanent magnet brushless dc motor (PMBLDC) can be greatly improved. Compared to standard silicon steel material the Hiperco magnetic material has high allowable flux density, high permeability and low specific iron loss. This paper presents the use of Hiperco magnetic material for the stator core of PMBLDC motor. The 200 W, 24 V radial flux PMBLDC motor is designed analytically and modelled in finite element analysis (FEA) software. The initial design incorporates use of M19 – 29 Ga Cold Rolled Non Oriented (CRNO) silicon steel material for the stator core. The initial design is validated using finite element analysis. In improved design, the conventional stator core material is replaced by Hiperco magnetic material and effect of Hiperco on the efficiency of the PMBLDC motor is analyzed. The improved model with the application of Hiperco is analyzed with FEA technique. It is analyzed that efficiency of PMBLDC motor is considerably improved with application of Hiperco.

Keywords
Brushless dc motor, Efficiency, Finite element analysis, Hiperco material.

Reference
[1] D. C. Hanselman, Brushless Permanent Magnet Motor Design, New York, McGraw- Hill, (1994).
[2] I. R. Hendershot and T. J. E. Miller, Design of Brushless Permanent Magnet Motors. Oxford, U.K.: Oxford, (1994).
[3] K. R. Rajagopal and C. Sathaiah., Computer Aided Design and FE Analysis of a PM BLDG Hub Motor,(2006). International Conference on Power Electronic, Drives and Energy Systems, New Delhi, India, (2006) 1-6.
[4] H. Toda, Y. Oda, M. Kohno, M. Ishida and Y. Zaizen., A New High Flux Density Non-Oriented Electrical Steel Sheet and its Motor Performance, in IEEE Transactions on Magnetics, 48(11)(2012) 3060-3063, Nov.
[5] R. Kolano, K. Krykowski, A. Kolano-Burian, M. Polak, J. Szynowski and P. Zackiewicz., Amorphous Soft Magnetic Materials for the Stator of a Novel High-Speed PMBLDC Motor, in IEEE Transactions on Magnetics, 49(4)(2013) 1367-1371.
[6] W. Chen, C. Lin and C. Chen., Analytical Comparison Between Ferrite Core and Steel Laminations Losses of Multi-Polar Brushless DC Motor., IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society, Taipei, Taiwan, (2007) 1192-1197.
[7] T. Ishikawa, K. Takahashi, Q. V. Ho, M. Matsunami and N. Kurita., Analysis of Novel Brushless DC Motors Made of Soft Magnetic Composite Core., in IEEE Transactions on Magnetics, 48(2)(2012) 971-974, Feb.