DG Placement in Distribution Systems using Analytical Techniques

DG Placement in Distribution Systems using Analytical Techniques

© 2021 by IJETT Journal
Volume-69 Issue-9
Year of Publication : 2021
Authors : Deena Lodwal Yadav, Sharat Chandra Choube
DOI :  10.14445/22315381/IJETT-V69I9P228

How to Cite?

Deena Lodwal Yadav, Sharat Chandra Choube, "DG Placement in Distribution Systems using Analytical Techniques," International Journal of Engineering Trends and Technology, vol. 69, no. 9, pp. 236-241, 2021. Crossref, https://doi.org/10.14445/22315381/IJETT-V69I9P228

The distributed generation to power distribution lines has become a trend in the world. The reasons behind the increasing use of distributed generation include the high cost of energy, environmental concerns, and the latest advancements in DG technology. Renewable DG sources are preferable to place near load center inject power in the system, hence support the system voltage, minimizing losses, and improve reliability. Location selection is an essential aspect of planning. A Selection method for DG placement with minimization of power loss objective is implemented in this research work. An Analytical technique was adopted here for DG placement with Voltage sensitivity index along with Voltage profile improvement indicator (VPII). A ranking created on voltage sensitivity index and VPII has been obtained for the best placement of DGs. Distribution load flow is implemented for loss calculation. Results and performance of the system are evaluated on33-bus test system.

Minimization of power loss, DG, voltage sensitivity index, VPII, and 33-bus test system.

[1] P. Chiradeja and R. Ramakumar, An approach to quantify the technical benefits of distributed generation, IEEE Transactions on Energy Conversion. 19 (4) (2004) 764-773.
[2] S. Elsaiah, M. Benidris, and J. Mitra, Analytical approach for placement and sizing of distributed generation on distribution systems, IET Generation, Transmission. Distribution, 8(6) (2014) 1039–1049.
[3] S. K.Injeti, V.K.Thunuguntla, and M. Shareef, Optimal allocation of capacitor banks in radial distribution systems for minimization of real power loss and maximization of network savings using bio-inspired optimization algorithms, International Journal of Electrical Power & Energy Systems, 69 (2015) 441-455.
[4] M. M.Aman, G.B.Jasmon,A.H. Bakar, H. Mokhlis,AND M. Karimi, Optimum shunt capacitor placement in distribution system—A review and comparative study,Renewable and Sustainable Energy Reviews, 30 (2014) 429-439.
[5] N. Acharya, P.Mahat, N. Mithulananthan, An analytical approach for DG allocation in primary distribution network, Int J Electr Power Energy Syst, 28 (2006) 669–7.
[6] L. D.Arya, A. Koshti, S. C. Choube, Distributed generation planning using differential evolution accounting voltage stability consideration, International journal of electrical power & energy, 42(1) (2012) 196-207.
[7] Y. K. Wu, S. M. Chang, and Y.L Hu., Literature review of power system blackouts. Energy Procedia, 141 (2017) 428-431.
[8] Y. M Atwa, E. F.Saadany, and M. M. M.Salma, Optimal renewable resources mix for distribution system energy loss minimization. IEEE Trans Power Syst, 25 (2010) 360–70.
[9] R. O. Bawazir, N.S.Cetin, Comprehensive overview of optimizing PV-DG allocation in power system and solar energy resource potential assessments. Energy Reports, 1(6) ( 2020) 173-208.
[10] T. Gozel, M.H. Hocaoglu, An analytical method for the sizing and sitting ofdistributed generators in radial systems. Electr Power Syst Res, 79 (2009)912–920.
[11] H. L. Willis, Analytical methods and rules of thumb for modeling DG-distribution interaction, Power Engineering Society Summer Meeting, 3(2000)1643-1644.
[12] D.Q. Hung, and N. Mithulananthan, Multiple distributed generator placement in primary distribution networks for loss reduction, IEEE Transactions on industrial electronics, 60(4) (2011) 1700-1708.
[13] C. Wang, M.H. Nehrir, Analytical approaches for optimal placement of distributed generation sources in power systems,IEEE Trans Power System, 19 (2004) 2068–76.
[14] G. Naik, D.K. Khatod,and M.P.Sharma, Distributed generation impact on distribution networks: A review, International Journal of Electrical and Electronics Engineering, 2(1) (2012) 68-72.
[15] P. Paliwal, N. P. Patidar, and R.. K. Nema, A comprehensive survey of optimization techniques used for distributed generator siting and sizing. IEEE Proc.Southeastcon., (2012) 1-7.
[16] Wu and X. Lv, Analysis on power flow of distribution network with DGs, China International Conference on Electricity Distribution. (2012) 1-4.
[17] D. Das, D. P. Kothari, and A. Kalam, Simple and Efficient Method for LoadFlow Solution of Radial Distribution Networks, Electrical Power & Energy Systems, 17(5) (1995) 335–346.
[18] A. Routray, K. D. Mistry and S. Arya, Loss Minimization in a Radial Distribution System with DG Placement Using Jaya Optimization Technique, IEEE International Conference on Sustainable Energy Technologies and Systems (ICSETS), (2019) 336-34
[19] R. Ranjan, D. DAS, Simple and efficient computer algorithm to solve radial distribution networks, Electric power components and systems. 3(1) 2003 95-107.
[20] G. W. Chang, S. Y. Chu and H. L. Wang, A Simplified Forward and Backward Sweep Approach for Distribution System Load Flow Analysis, International Conference on Power System Technology, (2006) 1-5
[21] J. V. B.Subramanyam, and C. Radhakrisna, Distributed Generation placement and sizing in unbalanced radial distribution system, World Academy of Science Engineering and Technology, 52 (2009) 737-744.
[22] V. V. Murthy, A. Kumar, Comparison of optimal DG allocation methods in radial distribution systems based on sensitivity approaches, International Journal of Electrical Power & Energy Systems. 1(53) (2013) 450-467.
[23] GopiyaNaik S, D.K.Khatod,and M.P. Sharma, Optimal Allocation of Distributed Generation in Distribution System for Loss Reduction, IACSIT Coimbatore Conferences, (2012) 42-46.
[24] R. Ramakumar, and P. Chiradeja,Distributed generation and renewable energy systems, IECEC`02 37th Intersociety Energy Conversion Engineering Conference( IEEE), (2002) 716-724.
[25] M. A. Kashem, V. Ganapathy, G. B. Jasmon, and M. I. Buhari, A NovelMethod for Loss Minimization in Distribution Networks, Proc. Of International Conferenceon Electric Utility Deregulation and Restructuring and Power Technologies , (2000) 251–255.