Webbing Design Analysis for Rice Cake Casing

Webbing Design Analysis for Rice Cake Casing

© 2021 by IJETT Journal
Volume-69 Issue-10
Year of Publication : 2021
Authors : Mohd Farriz Basar, Siti Nur Suhaila Mirin, MohdYuhazri Yaakob, Kamarul Amir Mohamed
DOI :  10.14445/22315381/IJETT-V69I10P206

How to Cite?

Mohd Farriz Basar, Siti Nur Suhaila Mirin, MohdYuhazri Yaakob, Kamarul Amir Mohamed, "Webbing Design Analysis for Rice Cake Casing," International Journal of Engineering Trends and Technology, vol. 69, no. 10, pp. 38-45, 2021. Crossref, https://doi.org/10.14445/22315381/IJETT-V69I10P206

Rice cake, also known as ketupat, is a traditional dish available in South East Asia. The casing for the rice cake is made of two woven palm leaves placed in a diamond and rhombus pattern. The rice was then put in the casing to cook and served as a complement to meat meals. The casings are constructed by weaving two palm leaves together by hand. Experts are necessary to make the case since the abilities required are fairly high, but they are typically found in the older generation. This project involves making a webbing design, modeling the design for rice cake casing, and analyzing the simulation results for the webbing design. Solidworks 2019 SP2 student edition software is used to simulate the webbing design. The time required to weave increased from 24 to 36 seconds as the number of squares increased, although the power of the actuators` motors stayed constant at 129.6 Watt. Satay rice cake casing is the best type of rice cake casing since it has 24 squares and takes the least time to weave at 24 seconds. By the end of this report, the design had been successfully simulated in software.

casing, ketupat, rice cake, webbing.

[1] Firmansyah Faturachman, Rossi Indiarto, Food Infrared Heating Technology: A Review of Its Impacts on Rice Bran Quality, International Journal of Engineering Trends and Technology 69(8) (2021) 218-224.
[2] Wood, Henry Trueman, et al. The Inventions Of John Kay (1704— 1770). Journal of the Royal Society of Arts, 60(3081) 1911 (2021) 73–86. JSTOR, www.jstor.org/stable/41339924.
[3] Rossi Indiarto, Anugerah Wisnu Pratama, TrisnaIntan Sari, Hanna Christy Theodora, Food Irradiation Technology: A Review of The Uses and Their Capabilities, International Journal of Engineering Trends and Technology 68(12) (2020) 91-98.
[4] Patrick Ejebheare Amiolemhen, Joshua Ahurome Eseigbe, Design and Fabrication of a Palm Kernel Oil Expeller Machine, International Journal of Engineering Trends and Technology 67(6) (2019) 39-46.
[5] Rude, Sandra, and Textile Artist Three Handworks. n.d. Weaving: The Complete Process from Thread to Cloth., 3Springshandworks.Com. Accessed August 29, 2021. http://www.3springshandworks.com/documents/process.pdf.
[6] Bagchee, Aruna, Vernacular Architecture of Handloom Sari Weavers in India: A Case for Conservation of Traditional Houses and Settlements of Handloom Weavers’ Clusters. Journal of heritage management 3(1) (2018) 1–26.
[7] Dr.TSSJayawardana, GHD Wijesena, Dr. EASK Fernando, Prof. RohanaKuruppu, Warp tension analysis of narrow fabric weaving and designing of tension compensator to avoid start up marks, International Journal of Engineering Trends and Technology (IJETT), 30(8)(2015) 393-399. ISSN:2231-5381.
[8] KinariToshiyasu, Weaving Machinery and Its Related Technologies, Journal of Textile Engineering, 53(2) (2007) 43-52.
[9] MonirehFazeli, Martin Kern, Gerald Hoffman, ChokriCherif, Development of three-dimensional profiled woven fabrics on narrow fabric looms, Textile Research Journal, 86(12) (2015) 1328-1340.
[10] S. Rathinavel. Fabric Design Pattern Feeding Through Human Machine Interface (Hmi) For An Electronic Jacquard Mechanism On A Semi-Automated Conventional Weaving Loom, International Journal of Research in Engineering and Technology, 05(01) (2016) 133–36. Crossref, doi:10.15623/ijret.2016.0501025.
[11] K.C.Goli , B.B.Deshmukh, A Review on Redesign of Drive System for Textile Powerloom Machine to Prevent Downtime and Improve Reliability of System, International Journal of Engineering Trends and Technology (IJETT), 12(1) (2014) 50-52. ISSN:2231-5381.
[12] Nagarajan, Ganapathy. Textile Mechanisms in Spinning and Weaving Machines (Woodhead Publishing India in Textiles). 1st ed., Woodhead Publishing India, (2015).
[13] Banerjee, N.N, Weaving Mechanism. Textile Book House, 11(2) (1999).
[14] Salmah Omar, Philip Lepun, Ribka Alan, Etnik dan pembentukanlandskapbudaya Malaysia: Senianyamantikar orang Ulu Sarawak, Geografia Malaysian Journal of Society and Space, 12(10) (2016) 21-28.
[15] FaridahSahari, Raha Hj Hassan, Plastik: Satu evolusi, inovasiatauancamandalamidentitisenikraftangan di sarawak. FakultiSenisGunaan&Krearif, UNIMAS, (2011) 17.
[16] Issues and Challenges In the Production of Handicrafts by Iban and Orang Ulu Women in Central Sarawak. Borneo Journal of Social Sciences and Humanities, 2020. Crossref, doi:10.35370/bjssh.2019.1.2-10.
[17] Art Energic, Blogspot.com. N.p., n.d. Web. 29 Aug. 2021
[18] Boldea, I., and Syed A. Nasar. Linear Electric Actuators and Generators. Cambridge, England: Cambridge University Press, (2011).