Free Rolling Friction Model of the Femural Component on the Tibial Plateau in knee prosthesis

Free Rolling Friction Model of the Femural Component on the Tibial Plateau in knee prosthesis

  IJETT-book-cover           
  
© 2022 by IJETT Journal
Volume-70 Issue-5
Year of Publication : 2022
Authors : Haider Sh. Wahad, Qasim K. Salman, Noor Emad Kareem
DOI :  10.14445/22315381/IJETT-V70I5P222

How to Cite?

Haider Sh. Wahad, Qasim K. Salman, Noor Emad Kareem, "Free Rolling Friction Model of the Femural Component on the Tibial Plateau in knee prosthesis," International Journal of Engineering Trends and Technology, vol. 70, no. 5, pp. 201-208, 2022. Crossref, https://doi.org/10.14445/22315381/IJETT-V70I5P222

Abstract
The current study proposed analyzing the free-rolling motion between the metal femoral part and the tibial polyethylene intermediate element UHMWPE. The effect of movements is evaluated by the moment of friction and the coefficient of rolling friction. The average coefficient of rolling friction depends on contact pressure distribution. A rapid decrease is observed for large values of the coefficient of friction at maximum angular velocities. The coefficient of friction on the free-rolling of the femoral component on the flat polyethylene support can be determined when the total number of oscillations (n=NOSC)is known from experiments. The frictional losses between the femoral metal component and the UHMWPE polyethylene tibial intermediate are determined. The loading device of the friction moment and the friction losses are observed by adapting the total knee prosthesis. In experimental part used inertial measurement connected to an integrated system using a sensor that records and displays the angle of rotation and the time until the moment of stopping (record oscillations). Oscillations are made by the femoral component on the flat polyethylene support when an imbalance is achieved compared to the initial state. The experiment was repeated ten times under identical conditions. The coefficient of statistical variation, defined as the ratio between the mean square deviation and the arithmetic mean, is 3.2%.

Keywords
Normal force, Rolling friction, Rolling angle, Knee prosthesis.

Reference
[1] H. Shen, Xianlong Zhang ?i Yao Jiang, Intraoperatively Made Cement-on-Cement Articulating Spacer for Infected Total Knee Arthroplasty, The Knee. 17(6) (2010) 407-411.
[2] J. M. Moll, P. J. Chesterman, R. I. Meanock and F. M. Andrews, Waldius Arthroplasty of the Knee, Annals of the Rheumatic Diseases. 32(5) (1973) 397-405.
[3] L. Amendola, D. Tigani ?i S. Fokter, History of Condylar Total Knee Arthroplasty în Recent advances of Hip and Knee Arthroplasty, Italy. 10(24) (2012) 452.
[4] G. Panait, Orthopedics - Practical Traumatology, Bucharest: Publistar. (2002).
[5] O. Puiu, Ion Dinulescu, and Puiu Georgiana, Treatment of Severe Sprains of the Post-Traumatic Knee, University of Pitesti Publishing House, Pitesti. (2006) 150-179.
[6] J. Ireland and E. Trickey, Macintosh Tenodesis for Anterolateral Instability of the Knee, Journal of Bone and Joint Surgery. 62B(3) (1980) 340-345.
[7] S. Eun-Kyoo, S. Jong-Keun, M. Jae-Young ?i H. Y. Ji-Hyoun, The Evolution of Modern Total Knee Prostheses, în Arthroplasty – Update. (2013) 618. DOI: 10.5772/54343.
[8] F. Fonseca, E. Rebelo ?i A. Completo, Tibial Periprosthetic Fracture Combined with a Tibial Stem Stress Fracture from Total Knee Arthroplasty, Revista Brasileira de Ortopedia. 46(6)( 2011) 736-740.
[9] C. I. Lupinca, Processing of Non-Metallic Materials, Resita: Eftimie Murgu. (2011).
[10] I. Carabas, Studiul Privind Caracteristicile Functionale, Construction And Materials Of Knee Stents Analele UVT-Seria EFS. (2008) 164-174.
[11] M. Bahraminasab, B. Sahari, K. Edwards ?i F. Farahma, Aseptic Loosening of Femoral Components, A Review of Current and Future Trends in Materials Used, Materials and Design. 42 (2012) 459-470.
[12] H. Oonishi ?i Masaru Ueno, Ceramic Versus Cobalt-Chrome Femoral Components; Wear of Polyethylene Insert in Total Knee Prosthesis, Journal of Arthroplasty. 24(3) (2009) 374-382.
[13] J.A.M.Ferreira, J.D.M.Costa, P.N.B.Reis., Static and Fatigue Behavior of Glass - Fiber - Reinforced Polypropylene Composites, Theoretical and Applied Fracture Mechanics, PII: S0167-8442(98)00068-8. 31 (1999) 67-74.