Optimization of Tribological Performance of Al6061T6/15% SiC/15% Al2O3/10% Graphite HMMC using Taguchi Method and Grey Relational Analysis

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2014 by IJETT Journal
Volume-8 Number-4                          
Year of Publication : 2014
Authors :  Vinod Kumar , Surender Sharma , Anup Verma
  10.14445/22315381/IJETT-V8P234

Citation 

Vinod Kumar , Surender Sharma , Anup Verma."Optimization of Tribological Performance of Al6061T6/15% SiC/15% Al2O3/10% Graphite HMMC using Taguchi Method and Grey Relational Analysis", International Journal of Engineering Trends and Technology(IJETT), V8(4),181-190 February 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

Optimization of tribological performance parameters of Al-6061T6 alloy reinforced with SiC, (Al2O3) 15% and graphite particulates of weight percentage of 10%. The wear and frictional properties of the hybrid metal matrix composites was studied by performing dry sliding wear test using pin-on-disc wear tester based on Taguchi method and Grey relational analysis. A L27 orthogonal array was selected for analysis of the data. From the tests result, it is observed that parameter applied load and sliding distance have significant contribution in controlling the friction and wear behaviour of hybrid composites. A confirmation test is also carried out to verify the accuracy of the result obtained through the optimization problem.

References

[1] Ghosh, S., Sahoo, P., Sutradhar, G., 2013. Tribological performance optimization of Al-7.5% SiCp Composites using Taguchi’s method & grey relational analysis, Hindawi Publishing Corporation, Journal of Composites, Vol.-2013.
[2] Miyajima, T., Iwai, V., 2003. Effect of reinforcements on sliding behaviour of aluminium matrix composites, wear 255, 606-616
[3] Kaur, K., Anant,R., Pandey, O. P., 2011.Tribological Behaviour of SiC Particle Reinforced Al-Si Alloy,Tribol lett 44: 41-58
[4] Ghosh, S., Sahoo, P., Sutradhar, G., 2013. Friction Performance of Al-10% SiCp Reinforced MMCs Using Taguchi Method, ISRN Tribology Vol. 2013.
[5] Wang, Y. Q., Afsar, A.M., Song, J.I., Tribological Behaviour of Al2O3/SiCp Hybrid MMCs.
[6] Basavarajappa, S., Chandramohan, G., Paulo Davim, J., 2007. Applications of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites, Materials & Design 1393-1398.
[7] Mishra, A. K., Yadav, R., Srivastva, R. K., 2013.Wear behaviour of Al-6061 with different reinforcement & particle size of SiC MMCs, Europian Journal Of Scientific Research Vol. 98 No.4.
[8] Radhika, N., Subramanian, R., Prasat, S., 2011. Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid MMC Using Taguchi’s Techniques, Journal of Minerals & Materials Characterization & Engg., Vol. 10 No. 5, PP. 527-443.
[9] Siriyala, R., Alluru, G. P., Penmetsa, R. M. R., Dmaiselvam, M., 2012. Application of grey–taguchi method for optimization of dry sliding wear properties of Aluminium MMCs, Front. Mech. 7(3): 279 – 287.
[10] Mishra, A. K., Sheokand, R., Srivastava, R. K., 2012. Tribological Behaviour of Al-6061/SiC MMCs by Taguchi’s Techniques, IJSRP Vol. 2.Issue 10.
[11] Taguchi, G., 1990. Introduction to quality engineering. Tokyo: Asian Productivity Organisation.
[12] Ross, P. J., 1996. Taguchi Techniques for Quality Engineering, 2nd edn. McGraw – Hill, New York.

Keywords
Metal Matrix Composites (MMCs), Friction, Wear, Taguchi Method, Grey Relational Analysis, Analysis of Variance.