Low Power Design and Simulation of 7T SRAM Cell using various Circuit Techniques

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2013 by IJETT Journal
Volume-4 Issue-5                      
Year of Publication : 2013
Authors : Pankaj Agarwal , Nikhil Saxena , Nikhita Tripathi


Pankaj Agarwal , Nikhil Saxena , Nikhita Tripathi. "Low Power Design and Simulation of 7T SRAM Cell using various Circuit Techniques". International Journal of Engineering Trends and Technology (IJETT). V4(5):1688-1693 May 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.


Low power memory is required today most priority with also high stability. The power is most important factor for today technology so the power reduction for one cell is vital role in memory design techniques. In this paper we introduced some design circuit techniques for low power design. Leakage current in standby mode is the m ajor part of power loss. We concentrate on the technique that to reduced the leakage current in standby mode. The one CMOS transistor leakage current due to various parameter is the vital role of power consumption. The CMOS leakage current at the process level can be decreased by some implement on deep sub micron method. The circuit level technique is reduced power consumption at very high level. In this paper we simulate the 7T SRAM cell using many techniques both circuit level, process level in one cell a s Hybrid cell.


[1] AminulIslam andMohd. Hassan “variability analysis of 6t and 7t sramcell in sub - 45nm technology” IIUM engineering journal, vol. 12, no. 1, 2011
[2] Shilpi Birla, R.K.Singh, Member IACSIT , and ManishaPattnaik, Static Noise Margin Analysis of Various SRAM Topologies, IACSIT International Journal of Engineering and Technology, Vol.3, No.3, June 2011
[3] Debasis Mukherjee, Hemanta Kr. Mondal and B.V.R. Reddy,” Static Noise Margin Analysis of SRAM Cell for High Speed Application ” IJCSI International Journal of Computer Science Issues, Vol. 7, Issue 5, September 2010.
[4] Benton H. Calhoun , Member, IEEE , and Anantha P. Chandrakasan , Fellow,” Static Noise Margin Variation for Sub - thresholdSRAM in 65 - nm CMOS ” IEEE, IEEE JOURNAL OF SOLID - STATE CIRCUITS, VOL. 41, NO. 7, JULY 2006
[5] Sanjeev K. Jain ,PankajAgarwal “ A Low Leakage and SNM Free SRAM Cell Design in Deep Sub micronCMOS Technology ”Proceedings of the 19th International Conference on VLSI Design (VLSID’06)
[6] Andrei Pavlov &ManojSachdev, “CMOS SRAM Circuit Design and Parametric Test in Nano - Scaled Technologies” . Intel Corporation, University of Waterloo, 2008 Springer Science and Business Media B.V., pp:1 2002.
[7] Rafik S. Guindi , Farid N. Najm, Design Techniques for Gate - Leakage Reduction in CMOS Circuits, Proceedings of the Fourth International Symposium on Quality Electronic Design, p.61, March 24 - 26, 2003.
[8] B. Alorda, G. Torrens, S. Bota and J. Segura Univ. de les IllesBalears,” Static - Noise Margin Analysis during Read Operation of 6T SRAM Cells ” Dept. Fisica, Cra. Valldemossa, km. 7.5, 07071 Palma de Mallorca, S

SRAM, Threshold Voltage, Circuit techniques, Process Technique