Design of Low Power One - Bit Hybrid - CMOS Full Adder Cells

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-5                      
Year of Publication : 2013
Authors : Sushil B. Bhaisare , Sonalee P. Suryawanshi , Sagar P. Soitkar

Citation 

Sushil B. Bhaisare , Sonalee P. Suryawanshi , Sagar P. Soitkar. "Design of Low Power One - Bit Hybrid - CMOS Full Adder Cells". International Journal of Engineering Trends and Technology (IJETT). V4(5):1810-1814 May 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.

Abstract

The aim of our work is to evaluate the pe rformance of One - bit Hybrid full adder cell. To achieve a good - drivability, noise - robustness, and low energy operations f or deep - sub micrometer, we explore Hybrid - CMOS style design. Hybrid - CMOS design styles utilize various CMOS logic style circuit to build new Full Adder with desired performance. This Full Adder is categorized into three modules. We compared the proposed Fu ll Adder cell with conventional static CMOS logic styles Adder Cells like C - CMOS, CPL, TFA, TGA and with some hybrid cells at different Load condition. Each Cell showed different power consumption, Delay, PDP and driving capability. The circuits being stud ied are optimized for energy efficiency at 0.18um CMOS process Technology.

References

[1] Sumeer Goel, Shilpa gollamadi,Ash ok kumar and Magdy Bayoumi , “ On The Design of Low Energy - Hybrid CMOS 1 Bit Full Adder Cell” IEEE 2004.
[2] V ahid Foroutan, Keivan Navi,and Majid Haghparst, “ A New Low Power Dynamic Full adder Cell Based on Majority Funcion ” IEEE 2008.
[3] Ahmed M. Shyms and Magdy A. Bayoumi “A Novel High - Performance 1 - bit Full Adder Cell” IEEE vol.47 No.5,May 2000.
[4] Ahmed M. Sh ams, and Magdy A. Bayoumi “A Novel Low - power Building Block CMOS for Adders”. IEEE 1998
[5] Ahmed M.Shams,Tarek K. Darwish, and Magdy A. Bayoumi “Performance Analysis of Low – power 1 - bit CMOS Full Adder Cell ” . IEEE Vol.10. No.1 February 2002
[6] Summer goel, shilpa gollamundi,ashok kumar and Magdy Bayoumi “ On the design of low - energy Hybrid CMOS 1 - bit Full Adder Cell”. 2004 IEEE
[7] Bart R. Zeydel , Dursun Baran , IEEE , and Vojin G. Oklobdzija . “ Energy - Efficient Design Methodologies: High - Performance VLSI Adders ” . IEEE Journal of solid - state circuits,Vol.45,No. 6, June 2010.
[8] Pooja Mendiratta1& Garima Bakshi. “ A Low - power Full - adder Cell based on Static CMOS Inverter.” International Journal of Electronics Engineering, 2(1), 2010, pp. 143 - 149.

Keywords
Full Adders, Hybrid CMOS Design style, deep - sub micrometer technology, low power, Delay & PDP