Effect of glass wool fibres on mechanical properties of concrete

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-7                      
Year of Publication : 2013
Authors : R.Gowri , M.AngelineMary

MLA 

R.Gowri , M.AngelineMary. "Effect of glass wool fibres on mechanical properties of concrete". International Journal of Engineering Trends and Technology (IJETT). V4(7):3045-3048 Jul 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.

Abstract

The present trend in concrete tech nology is towards increasing the strength and durability of concrete to meet the demands of the modern construction world at lower cost. These factors can be achieved in concrete by adding natural or synthetic fibre. In the case of Glass Fibre reinforced Concrete, strength of the concrete is increased, but at higher cost. Hence, research has to be done to provide an alternative use of fiber glass. In the present study, Glass wool fibre is added to the concrete to increase the strength as compared to the con ventional concrete at lower cost. The strength parameters of concrete such as compressive strength and tensile strength were studied by varying the percentage of fibre from 0.025% to 0.075% of the weight of concrete.

References

[1] Griffiths R “An assessment of the properties and degradation b ehaviour of glass - fibre - reinforced polyester polymer concrete”, Composites Science and Technology , 2000, pp. 2747 - 2753.
[2] Parviz Soroushian “Fiber - Type Effects on the Performance of Steel Fiber Reinforced Concrete”, ACI Materials Journal. March - April 1991 . pp. 129 - 134.
[3] Ga nesh Babu. K and Pavan Kumar. D “ Behavior of Glass Fibre Reinforced Cement Composites ”, ICFRC International Conference on Fibre Composites, High Performance Concretes and Smart Materials, 2004, 8 - 10 Jan., Chennai.
[4] J. A. O. Barros, J. A. Fi gueiras, “ Flexural behavior of steel fiber reinforced concrete ” PhD dissertation, Civil Eng. Dept., Faculty of Engineering, University of Porto, Portugal ,2001.
[5] B.L.P. Swami , “Studies on glass fiber reinforced concrete composites – strength and behavior Ch allenges”, Opportunities and Solutions in Structural Engineering, 2010,pp - 1 - 12
[6] Urooj Masood , Dr. B.L.P. Swami, Dr. A.K.Asthana, “Behavior of Mixed Fiber Reinforced Concrete (MFRC) Exposed to Acids - An Experimental Study”, Co mposites Science and Technology, 2011,pp. 10 - 16
[7] IS: 10262 - 1982 , Indian Standards – Concrete Mix Proportioning.
[8] ACI Committee 544. 1989. Measurement of Properties of Fibre Reinforced Concrete, (ACI 544.2R - 889). American Concrete Institute, Detroit, Michigan, USA.
[9] IS 456:2000, Plain and R einforced concrete - code of practice (Fourth Revision)

Keywords
Compressive strength, Glass wool fibre, Tensile strength, Synthetic fibre