IJBTT

Kinematic and Dynamic Study of Cam Mechanisms for Bottling Machines

Kinematic and Dynamic Study of Cam Mechanisms for Bottling Machines
	© 2022 by IJETT Journal
	Volume-70 Issue-1
	Year of Publication : 2022
	Authors : Fabio Corradini, Marco Silvestri
	DOI :  10.14445/22315381/IJETT-V70I1P201

How to Cite?

Fabio Corradini, Marco Silvestri, "Kinematic and Dynamic Study of Cam Mechanisms for Bottling Machines," International Journal of Engineering Trends and Technology, vol. 70, no. 3, pp. 1-12, 2022. Crossref, https://doi.org/10.14445/22315381/IJETT-V70I1P201

Abstract
The main objective of this study is to analyze and optimize the cam mechanisms of the cork capper station currently in use for wine bottling machines. For each machine model considered, current cam profiles and corresponding real trajectories performed during operation are analyzed. Subsequently, various alternative laws of motion are tested to implement the same process, respecting the same precision points but modifying other parts of trajectory to improve machine dynamic performances. A series of tests carried out on a reconfigurable prototype and using different types of cork have made it possible to verify the effectiveness of the new laws of motion and to obtain the load acting on the machine at different operating speeds.

Keywords
Cam mechanisms, the law of motion, kinematic analysis, dynamic analysis.

Reference
[1] F.Y. Chen, A survey of the state of the art of cam system dynamics, Mech. Mach. Theory, 12 (1977) 201–224.
[2] A.M. Shinde, G.J. Tate, R.R. Shinde, S.P. Kadam, P.M. Patil, Design & Manufacturing of Cork Fitting Machine, Irjet., 3 (2016) 2766–2770.
[3] L. Piergiovanni, S. Limbo, Food packaging : materiali, tecnologie e qualita? degli alimenti, (2010) 562.
[4] Z. Tang, Y. Li, Y. Zhou, H. Zhang, Inertial vibration characteristics of track chassis caused by the reciprocating motion of crank slider, Shock Vib., 2019 (2019).
[5] S. Bako, T. Usman, I. Bori, A. Nasir, Simulation of a Wet Cylinder Liner, Int. J. Mech. Eng., 6 (2019) 12–17.
[6] R. Garziera, E. Manconi, M. Silvestri, Input laws for dynamic control: Theory, experiments, and robustness, in Proc. 2006 SEM Annu. Conf. Expo. Exp. Appl. Mech., (2006) 1642–1649.
[7] A. Babawuya, I. Bori, M.D. Bako, S.A. Yusuf, A. Jibrin, A.. Elkanah, A. Mohammed, Effects of Generating Plant Noise on Humans and Environment, Int. J. Eng. Trends Technol, 35 (2016) 417–422.
[8] D. Mundo, H.S. Yan, Kinematic optimization of ball-screw transmission mechanisms, Mech. Mach. Theory., 42 (2007) 34–47.
[9] H. Giberti, L. Sbaglia, M. Silvestri, Mechatronic Design for an Extrusion-Based Additive Manufacturing Machine, Mach., 5 (2017) 29.
[10] G. Avventuroso, R. Foresti, M. Silvestri, E.M. Frazzon, Production paradigms for additive manufacturing systems: A simulation-based analysis, in 2017 Int. Conf. Eng. Technol. Innov., IEEE, (2017) 973– 981.
[11] G. Avventuroso, M. Silvestri, E.M. Frazzon, Additive Manufacturing Plant for Large Scale Production of Medical Devices: A Simulation Study, IFAC-papers online., 51 (2018) 1442–1447.
[12] C. Wang, X. Wang, B. Zhang, Design of the flying shear servo control system, Proc. - 2017 Chinese Autom. Congr. CAC 2017. 2017- January, (2017) 1659–1664.
[13] S.A. Berestova, N.E. Misyura, E.A. Mityushov, Mechanics of Smooth Coordinated Motion of Multi-Axis Mechatronic Device, Proc. - 2019 Int. Russ. Autom. Conf. RusAutoCon ,. (2019) 1–5.
[14] M.A. Silva, M. Julien, M. Jourdes, P.L. Teissedre, Impact of closures on wine post-bottling development: A review, Eur. Food Res. Technol., 233 (2011) 905–914. https://doi.org/10.1007/S00217-011- 1603-9/TABLES/5.
[15] M.A. Fortes, Cork, and Corks, Eur. Rev., 1 (1993) 189–195.
[16] A. Silva, M. Lambri, M.D. De Faveri, Evaluation of the performances of synthetic and cork stoppers up to 24 months post-bottling, Eur. Food Res. Technol, 216 (2003) 529–534.
[17] P. Lopes, C. Saucier, P.-L. Teissedre, Y. Glories, Oxygen transmission through different closures into wine bottles, Pract. Winer. Vineyard.,(2015) 38–42.
[18] H. Venkatesh, K. Annamalai, S. Thiyagarajan, Development of Servo Controlled Automation For Tmc (Tandem Master Cylinder) Performance Test Rig, Int. J. Mech. Eng., 8 (2021) 41–46.
[19] A. Mahmoud M, S. M-Emad S, S. A.B, Vehicle Active Suspension System performance using Different Control Strategies, Int. J. Eng. Trends Technol., 30 (2015) 106–114.
[20] M. Silvestri, M. Confalonieri, A. Ferrario, Piezoelectric actuators for micro-positioning stages in automated machines: experimental characterization of open-loop implementations, FME Trans., 45 (2017) 331–338.
[21] M. Sánchez-González, D. Pérez-Terrazas, Assessing the percentage of cork that a stopper should have from a mechanical perspective, Food Packag. Shelf Life. 18 (2018) 212–220.
[22] D. Groza, C. Antonya, Dynamically Spring Balanced Slider-Crank Mechanism for Reciprocating Machines, Int. J. Mech. Eng., 2 (2015) 22–26.
[23] J.D. Smith, Vibration measurement and analysis, (2013).
[24] P. H. Jain, S. P. Bhosle, A Review on Vibration Signal Analysis Techniques Used for Detection of Rolling Element Bearing Defects, Int. J. Mech. Eng., 8 (2021) 14–29.
[25] H. Giberti, A. Pagani, Flexibility oriented design of a horizontal wrapping machine, Mech. Sci., 6 (2015) 109–118.
[26] M. Silvestri, P. Pedrazzoli, C. Boër, D. Rovere, Compensating high precision positioning machine tools by a self-learning capable controller, Proc. 11th Int. Conf. Eur. Soc. Precis. Eng. Nanotechnology, EUSPEN 2011., 2 (2011) 121–124.
[27] M. Silvestri, M. Banfi, A. Bettoni, M. Confalonieri, A. Ferrario, M. Floris, Use of Laser Scanners in Machine Tools to Implement Freeform Parts Machining and Quality Control, Smart Innov. Syst. Technol., 54 (2015) 527–536.
[28] G. Avventuroso, M. Silvestri, P. Pedrazzoli., A Networked Production System to Implement Virtual Enterprise and Product Lifecycle Information Loops, IFAC-papers online., 50 (2017) 7964–7969.
[29] L. Sbaglia, H. Giberti, M. Silvestri, The Cyber-Physical Systems Within the industry 4.0 Framework, in Mech. Mach. Sci., Springer, Cham, (2019) 415–423.