Performance Comparison of Different Buck-Boost Converters for Power Factor Correction in an SMPS for PC Applications
Performance Comparison of Different Buck-Boost Converters for Power Factor Correction in an SMPS for PC Applications |
||
 |
 |
|
| © 2024 by IJETT Journal | ||
| Volume-72 Issue-8 |
||
| Year of Publication : 2024 | ||
| Author : Poorva Sharma, Dewashri Pansari, Manjeet Singh Sonwani, Suman Dass, Chetna Sinha, Ravi Kumar |
||
| DOI : 10.14445/22315381/IJETT-V72I8P130 | ||
How to Cite?
Poorva Sharma, Dewashri Pansari, Manjeet Singh Sonwani, Suman Dass, Chetna Sinha, Ravi Kumar,"Performance Comparison of Different Buck-Boost Converters for Power Factor Correction in an SMPS for PC Applications," International Journal of Engineering Trends and Technology, vol. 72, no. 8, pp. 325-331, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I8P130
Abstract
In the conventional power supplies used for PC applications, the supply current’s Total Harmonic Distortion (THD) ranges up to 80%, and the power factor goes as low as 0.55. When a large number of such power is used for powering up many electronic appliances, the power quality of the distribution system deteriorates drastically, simultaneously increasing the neutral current considerably. This affects the performance parameters and efficiency of the distribution system adversely. This paper aims to provide an improved model of SMPS (Switched Mode Power Supply) with a power factor correction stage, which could look into the reduction of harmonic content and improve the quality of supply. Three types of buck-boost converters are explored here, namely, a conventional buck-boost, Cuk and SEPIC, which are employed for PFC. All three converters have been analyzed, and their design equations are derived and used to design each component in these converters in Discontinuous Conduction Mode (DCM). Then each one of them has been modeled in MATLAB-Simulink environment. The performance of the modeled power supply with three different types of PFC converters is compared in terms of settling time, overshoot, power factor, and current harmonic content at the utility interface point stress across the devices, number of components and capability to regulate the voltage output during supply voltage and load variations. From this objective comparison, it would be easy for any user to make a judicious choice for the SMPS application as per the user requirements.
Keywords
Converters, Power quality, Simulation, SMPS, THD.
References
[1] Luka Petrović, Šandor Iles, and Jadranko Matuško “Self-Learning Model Predictive Control Based on the Sequence of Controllable Sets,” 19th International Conference on Electrical Drives and Power Electronics, Dubrovnik, Croatia, pp. 359-364, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Shikha Singh et al., “Power Factor Correction in Switched Mode Power Supply for Computers Using Canonical Switching Cell Converter,” IET Power Electronics, vol. 8, no. 2, pp. 234-244, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[3] William P. Robbins, Ned Mohan, and Tore M. Undeland, Power Electronics: Converters, Applications and Design, 3rd Edition, Wiley, pp. 1-802, 2003.
[Google Scholar] [Publisher Link]
[4] Hugo Ribeiro, and Beatriz Borges, “Techniques to Obtain Single-Stage Power Supplies with Power Factor Correction (PFC),” International Journal of Electronics, vol. 98, no. 4, pp. 487-504, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Joel Turchi et al., “Power Factor Correction Handbook,” ON Semiconductor, pp. 1-130, 2014.
[Google Scholar] [Publisher Link]
[6] D. Prasad et al., “Cuk and SEPIC Converter,” Power Electronics, IIT Kharagpur.
[Publisher Link]
[7] L. Ashok Kumar, S. Albert Alexander, and Madhuvanthani Rajendran, “Emerging DC–DC Converter Topologies,” Power Electronic Converters for Solar Photovoltaic Systems, pp. 289-329, 2021.
[CrossRef] [Publisher Link]