Behavior of Prestressed Concrete Strengthened with and without SFRC Beams Subjected to Fatigue Loading

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2018 by IJETT Journal
Volume-65 Number-2
Year of Publication : 2018
Authors : Zuhiar A. Muhamed, Mohammed A. Abdulsaied
DOI :  10.14445/22315381/IJETT-V65P219

Citation 

MLA Style: Zuhiar A. Muhamed, Mohammed A. Abdulsaied "Behavior of Prestressed Concrete Strengthened with and without SFRC Beams Subjected to Fatigue Loading" International Journal of Engineering Trends and Technology 65.2 (2018): 102-106.

APA Style:Zuhiar A. Muhamed, Mohammed A. Abdulsaied (2018). Behavior of Prestressed Concrete Strengthened with and without SFRC Beams Subjected to Fatigue Loading. International Journal of Engineering Trends and Technology, 65(2), 102-106.

Abstract
A substantial number of prestressed concrete structures such as bridge deck slabs, bridge girders, airport runways, or marine installations are often subjected to fatigue loading during their service life. These loads can result in a steady decrease in the stiffness of the structure and increases the risk of fatigue failure of prestressing strands through undergoing millions of cyclic loads. Use of steel-fiber reinforcement concrete (SFRC) materials for strengthening of structural members has become an increasingly popular area of research and application for concrete reinforcement in the last decade. However, very little work has been undertaken to determine their effectiveness for strengthening prestressed concrete. This experimental study is proposed to investigate the efficiency of using steel fibers to improve load carrying capacity and fatigue performance of prestressed concrete beam subjected to cyclic loading. Two prestressed concrete beam specimens of 180 mm in width, 250 mm in depth and 3500 mm in length were tested with steel fiber contents of (zero and 3 %) by volume of concrete, under constant amplitude cyclic and static loading. Based on the experimental results, it can be seen that the load carrying capacity of steel fibre increased by approximately 22% than the Plain prestressed concrete beam.

Reference
[1] Altun, F., and Aktas, B. (2013). ?Investigation of reinforced concrete beams behavior of steel fiber added light weight concrete.? Constr. Build.Mater., 38, 575–581.
[2] Balaguru, P. and Shah, S. P., 1992. ?Fibre reinforced cement composites?, McGraw-Hill, USA.
[3] Barnes, R. A., and Garden, H. N. (1999). ?Time-dependent behaviour and fatigue.? Strengthening of reinforced concrete structures using externally bonded FRP composites in structural and civil engineering, L. C. Hollaway and M. B. Leeming, eds., Woodhead, Cambridge, UK.
[4] Bentur, A., and Mindness, S. (2007). Fiber reinforced cementitious composites, Taylor & Francis, New York.
[5] Comité Euro-International du Béton (CEB-FIP). (1988). ?Fatigue of concrete structures, state-of-the-art report.? CEB Bulletin d’In formation No. 188, Lausanne, Switzerland.
[6] Foster, S. J. (2009). ?The application of steel-fibers as concrete reinforcement in Australia: From material to structure.? Mater. Struct., 42(9), 1209–1220.
[7] Htut, T. N. S., and Foster, S. J. (2010). ?Unified model for mixed mode fracture of steel fiber reinforced concrete.? Proc., Fracture Mechanics of Concrete and Concrete Structures—High Performance, Fiber Reinforced Concrete, Special Loadings and Structural Applications (FraMCoS-7), B. H. Oh, et al., eds., Korea Concrete Institute, South Korea, 1469–1477.
[8] Kovács, I., and Balázs, G. L. (2003). ?Structural behaviour of steel fibre reinforced concrete.? Struct. Concr., 4(2), 57–63.
[9] [9] Lee, M. K., and Barr, B. I. G. (2004). ?An overview of the fatigue behaviour of plain and fiber reinforced concrete.? Cem. Concr. Compos., 26(4), 299–305.
[10] Mallet, G. P. (1991). Fatigue of reinforced concrete, Her Majesty’s Stationery Office, London.
[11] Okay, F., and Engin, S. (2012). ?Torsional behavior of steel fiber reinforced concrete beams.? Constr. Build. Mater., 28(1), 269–275.
[12] Olivito, R. S., and Zuccarello, F. A. (2010). ?An experimental study on the tensile strength of the steel fibre reinforced concrete.? Composites, Part B, 41(3), 246–255.
[13] Romualdi, J. P., and Batson, G. B.,1963. ?Mechanics of crack arrest in concrete?, Journal of the Mechanics Division, ASCE, Vol. 89, No. EM3(2), pp: 147-168.
[14] Singh, S. P., Ambedkar, B. R., Mohammadi, Y., and Kaushik, S. K. (2008). ?Flexural fatigue strength prediction of steel fibre reinforced concrete beams.? Electron. J. Struct. Eng., 8, 46–54.
[15] Tejchman, J., and Kozicki, J. (2010). Experimental and theoretical investigations of steel-fibrous concrete, Springer, Berlin.
[16] Thun, H., 2006. Assessment of fatigue resistance and strength in existing concretestructures, PhD Dissertation, Lulea University of Technology, Lulea, Sweden.
[17] Tilly, G. P. (1979). ?Fatigue of steel reinforcement bars in concrete:A review.? Fatig. Eng. Mater. Struct., 2(3), 251–268.
[18] Tilly, G. P. (1985). ?Fatigue review: Fatigue of land based structures.?Inter. J. Fatigue, 7(2), 67–78.
[19] Zanuy, C., Albajar, L., and Fuente, P. (2009). ?Sectional analysis of concrete structures under fatigue loading.? ACI Struct. J., 106(5),667–677.
[20] Zhang, J., Li, V. C., and Stang, H. (2001). ?Size effect on fatigue in bending of concrete.? J. Mater. Civ. Eng., 10.1061/(ASCE)0899-1561(2001) 13:6(446), 446–453.
[21] Zollo, R.F., 1997. ?Fiber-reinforced concrete: an overview after 30 years of development?, Cement and Concrete Composites, Vol. 19, No. 2, pp: 107–122.

Keywords
prestressed concrete, Steel fibers, Beams, Fatigue, Cyclic loads.