Strength of Concrete-Filled Carbon Fiber-Reinforced Polymer Columns

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2020 by IJETT Journal
Volume-68 Issue-5
Year of Publication : 2020
Authors : Utkarsh Roy, Shubham Khurana, Pratikshit Arora, Vipin
DOI :  10.14445/22315381/IJETT-V68I5P211S


MLA Style: Utkarsh Roy, Shubham Khurana, Pratikshit Arora, Vipin  "Strength of Concrete-Filled Carbon Fiber-Reinforced Polymer Columns" International Journal of Engineering Trends and Technology 68.5(2020):62-66. 

APA Style:Utkarsh Roy, Shubham Khurana, Pratikshit Arora, Vipin . Strength of Concrete-Filled Carbon Fiber-Reinforced Polymer Columns  International Journal of Engineering Trends and Technology, 68(5),62-66.

Carbon fiber, owing to its greater strength-to-weight ratio, has found its application in civil engineering and architecture as well. Carbon fiber reinforcement can be used for concrete columns instead of the traditional steel bar reinforcement. Carbon fiber provides not only additional strength but also encases the concrete, acting as a protective cover. It increases the reliability of the reinforced concrete columns at a lower service cost. This is especially useful in coastal areas or hilly areas, where the structure is prone to environmental damage or is difficult to be constructed by conventional methods. The effectiveness of these columns is a function of a number of factors which include the nature of fiber reinforcement, width of fiber wall, slenderness ratio and type of concrete used, among others. In the present research, the compressive strength of circular composite columns is determined as a function of three parameters, namely the diameter of column, thickness of carbon fiber wall and strength of concrete. To develop relations between these three parameters, fifteen fiber-reinforced columns are fabricated using the standard procedures, filled with concrete of various grades, and tested for compressive strength. The results of the compressive test further act as input to a design of experiments software, Design Expert 12.0, which provides regression equations for compressive strength as a function of the aforementioned input parameters.


[1] Aire, C., Gettu, R., & Casas, J. R. (2001). “Study of the compressive behaviour of concrete confined by fiber reinforced composites”. carbon, 1.
[2] Purba, B. K., & Mufti, A. A. (1999). “Investigation of the behaviour of circular concrete columns reinforced with carbon fiber reinforced polymer (CFRP) jackets”. Canadian Journal of Civil Engineering, 26(5), 590-596.
[3] KM, Ahsana Fathima, and Shibi Varghese. "Behavioral Study of Steel Fiber and Polypropylene Fiber Reinforced Concrete." International journal of research in engineering and technology 2.10 (2014): 17-24.
[4] Mirmiran, A., Shahawy, M., & Beitleman, T. (2001). Slenderness limit for hybrid FRP-concrete columns. Journal of Composites for Construction, 5(1), 26-34.
[5] Yan, Z., & Pantelides, C. P. (2011). Concrete column shape modification with FRP shells and expansive cement concrete. Construction and Building Materials, 25(1), 396-405.
[6] Aziz, OMAR Q., and BAHMAN O. Taha. "Mechanical properties of high strength concrete (HSC) with and without chopped carbon fiber (CCF)." International journal of civil engineering (IJCE), 2 (1), 1 12 (2013).
[7] Mirmiran, A., Shahawy, M., Samaan, M., Echary, H. E., Mastrapa, J. C., & Pico, O. (1998). Effect of column parameters on FRP-confined concrete. Journal of Composites for construction, 2(4), 175-185.
[8] Al-Waily, Muhannad, et al. "Influences of Glass and Carbon Powder Reinforcement on the Vibration Response and Characterization of an Isotropic Hyper Composite Materials Plate Structure." International Journal of Mechanical&Mechatronics Engineering IJMMEIJENS 17.06 (2017).
[9] Chaallal, O., Shahawy, M., & Hassan, M. (2003). Performance of axially loaded short rectangular columns strengthened with carbon fiber-reinforced polymer wrapping. Journal of Composites for Construction, 7(3), 200-208.
[10] Xiao, Y., & Wu, H. (2000). Compressive behaviour of concrete confined by carbon fiber composite jackets. Journal of materials in civil engineering, 12(2), 139-146.
[11] Tomar, Archit, and Dheer Singh. "Modelling and Analysis of a Chassis Frame by Using Carbon Fiber and E-Glass Epoxy as Composite Material: A Comparative Study." International Research Journal of Engineering and Technology 3.04 (2016): 2395-0072.
[12] Parvin, A., & Schroeder, J. M. (2008). Investigation of eccentrically loaded CFRP-confined elliptical concrete columns. Journal of Composites for Construction, 12(1), 93-101.
[13] JEEWG, MUHSIN J., ABDAL-KAREEM F. HASSAN, and JAWAD K. ZEBOON. "Experimental and numerical investigation of the dynamic characteristic of laminated composite plate hybrid with steel." Int. J. of General Eng. and Techn.(IJGET) 3 (2014): 1.
[14] He, K., Chen, Y., & Yan, Y. (2020). Axial mechanical properties of concrete-filled GFRP tubular hollow composite columns. Composite Structures, 112174.
[15] MAHALAKSHMI, B. NAGA, and V. VARA PRASAD. "Study of mechanical behavior of carbofiber reinforced epoxy composites." International Journal of mechanical and production engineering research and development (2013).

Composites, carbon fiber, concrete column, compressive strength, design of experiments.